1966 Ford Mustang "289 distributor" Questions

...289 eHow step by step guide and a vid on distributor placement. If you do not have a light, try to borrow one to confirm your position/timing are good...there's a video on the ignition timing as

...289 2bl. When I got the the car it was hard to start especially when it was hot. We rebuilt the carb with all new stuff and cleaned really well. The hard starting when hot is gone and it pulls well ...

firing order diagram for a 289 motor Firing Order: 1-5-4-2-6-3-7-8 Distributor Rotates Counter-Clockwise

the firing order for a 289 cu 1967 ford mustang go google and type in-- firing order of ford engines--- it shows the firing order and the distributor rotation for each engine

...289. The distributor is brand new, carburator is new, plugs are new and still won't fire to start. I think the wires may not be on the proper spots. Try this. If the distributor is in the right way, ...

...289 with an electronic ignitor inside the distributor, the car sometimes will not start and when checked I have no spark, I do have power at the coil, the problem is intermitten as s Car has ...

289/2b, I cant get her to idle while in drive. If I shift to N or P she idles fine. Sounds as though you have a vacuum problem...check your hoses to and from the carb... Check your idle rpm in neutral

...289 backfires and spits back in carb timing chain is good new evever thing points plugs and wires ran good went south all at once any ideals Recheck timing. Get #1 cylinder to top dead center on the ...

...289 engine Okay, you have to set the number 1 cylinder at TDC of its compression stroke, and then drop in the distributor so the rotor is pointing to the #1 spark plug wire tower. This should start ...

...289. First of all,and you've probably done it already, is to make CERTAIN all vacuum hoses and connections, tees etc. are leak free. Then move on to diaphram actuated valves (egr valve, heater core ...