HP LaserJet 1300 Printer "mylar" Questions

...crackling, crunching noise. The output will be skewed and wrinkled. SOLUTION: Reposition the black Mylar light shields back into the proper position. Unplug the power cord from the product. Remove ...

...the transfer roller & transfer belt and what does the belt look like? tranfer belt is a large mylar black belt. transfer roller is a skinny gray foam ...

...it. any ideas? Yes, check the fuser. Pull it out and check the rollers. You will probably find the mylar around the roller torn ...

will not print, but ready light is on and tray is full of paper. status icon states "out of paper' BUT PAPER TRAY IS FULL. remove the paper and look down in the slot, sometimes the (brown) guide ...

...that is bent,find it and push it towards the inside of printer (is a black or dark brown plastic

...close the door.... HELP!! I got a feeling that the ETB isn't seated correctly. The ETB is that big mylar belt that lowers with the front door. Pull the ETB out and check that both black plastic ...

...using the flatbed, no line is produced on the finished page. Please help. You need to change the mylar strip on the ADF and also you need to clean the narrow strip of glass that the scanner uses ...

...How do I get rid of it entirely? What did you clean? If it was the Image Transfer Belt (the big mylar belt in the front), do it again. Print and see if the yellow is smearing again. If it is ...

...there is black .5" line in the middle of the page The correct answer is to clean or replace the mylar sheet on the bottom of the adf Lift up the document feeder and clean the scanner ...