Shark Navigator Bagless Upright Vacuum "hose clog" Questions

Ad

Question about Dyson Vacuums

1 Answer

...hose, needs replaced. Clog between back of tank and filter. This is where the hose attaches to the tank. Remove clog. Clogged filter at bottom of tank, needs cleaned. Remove tank. There's a screen at ...

Ad

Question about Bissell Vacuums

1 Answer

...clog in my hose, probably a sock, I have pushed it through to the hard plastic handle end of the hose, help! can the plastic handle wand be disconnected from the hose to remove the clog??? Thank you ...

Ad

Question about Hoover Vacuums

1 Answer

...clog from where the hose hooked into and the inlet at the bottom. If at the end of the hose there is no suction, take the hose off and see if you see a clog in it. If no clog there, then check all ...

Question about Broan-NuTone Vacuums

1 Answer

clog in your hose Take your central vacuum hose and connect it directly to the dirt canister. After turning on the vacuum if the hose has normal suction here then the clog exists in your tubing. Click

clogged.. Stretch the hose out streight to look down it.. Sometimes the clog is were the hose connects to the upper part.. Sometimes the clog is at the lower part - or maybe in the middle of the hose.

Question about Bissell Vacuums

1 Answer

use a broom handle to push clog back through. If the hose isn't blocked, check the tank where the hose attaches. Just inside clogs often form. Clean if necessary. Check the filter, and change if dirty

...hose to knock loose any clog that might be inside, not much came out. If I press the end of the hose against my palm there feels to be a lot of suction but it won't even pick up a cheerio off a ...

Question about Kenmore Vacuums

1 Answer

hose clog? My old cannister model 116 followed with numbers 2839580 marked Kenmore 3.9 with power-mate, worked fine until the bag got overly full. I have changed the bag, cleaned the filter, removed a

Question about Eureka Vacuums

2 Answers

...hose has a clog in it, or the dirt inlet down by the brush roll is clogged. Pull the hose off and see if you have suction at the end of the hose, that will tell you which way to look for a clog. 1 ) ...

Question about Bissell Vacuums

1 Answer

...carpet. Had vacuum for almost 3 years. Something must be in the hose causing a clog, take the hose off and if suction is good where the hose hooks up, then there is something caught inside the

Not finding what you are looking for?
Shark Navigator Bagless Upright Vacuum Logo

160 questions posted

Ask a Question

Usually answered in minutes!

Top Shark Vacuums Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3808 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Shark Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...