SOURCE: error codes 442 and 456 on 2003 Chrysler Town and Country
Could be the gas cap. Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister. I have 2003 T&C and had the small leak and large leak codes. I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser. I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe). The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.
SOURCE: fuse for stereo/cd in chrysler town and country minivan
Its in the box next to the battery and i had the same problem.The fuse is on the first line top.
Thanks
SOURCE: locassion of output speed sensor on 2003 Town and Country
The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.
SOURCE: radiator fan relay,2001 chrysler town country
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
SOURCE: I have a 2004 Chrysler Town and Country and my
P0440:
P0441:
Bad vacuum switch
316 views
Usually answered in minutes!
×