Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine
Fig. Hehow many oxygen sensors in a 2001 chrysler sebring - 99e413c.jpg (HO2S) location (sensor 2)-2.4L engine
how many oxygen sensors in a 2001 chrysler sebring - e2a250f.jpgn>Fig. Heated Oxygen (HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine
Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine
I hope help you with this (rated this help). Good luck.
Since 1996, most vehicles are fitted with 2 oxygen sensors. There is one upstream from teh cataytic converter and one downstream, just behind the catalytic converter. The upstream O2 sensor is generally the one that fails first, but if the check engine light is on, check to see which fault code the computer is setting. If it's #1 Oxygen sensor, then the upstream one is at fault. (#2 is the downstream sensor.)
I hope this helps! :)
I have a chrysler sebring 2001 lx how many oxygen sensor come with it?
SOURCE: i have a 2001 chrystler sebring coupe lxi 3.0
Bank 1 is the exhaust manifold at the firewall, sensor 2 is the O2 sensor after the catalytic converter.
SOURCE: Bank 1 Sensor 1 - Oxygen sensor needs to be
The sensor you indicate would be on the manifold of the head containing cyl.# 1, top sensor (prior to catalytic conv.) 6 cyl. engine. 4 cylinder would be sensor on exhaust manifold. Confirm sensor failure prior to replacing as chrysler harness connectors are known for pin failures at 02 sensor connections. Inspect for burnt pins and cracked/chaffed wires first before changing sensor.
SOURCE: can anyone tell me where the camshaft positioning sensor is located on my 2001 c
It is located on the front of the motor....looks like this:
SOURCE: Why does 2001 Chrysler sebring A/C cuts in and
It's low on refrigerant ( probably uses R-134a) available at WalMart. Low refrigerant pressure switch deactivates A/C compressor for safety reasons.
SOURCE: oil sending unit on 2004 chrysler sebring V6
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
Rate me if you like my answer..
Thanks
8,380 views
Usually answered in minutes!
JZLimited,
On the picture above for the 2.7 liter engine, are these sensors located on top of the engine if I am looking under the hood? The picture looks like the oil dipstick is on the left side.
×