Timing marks i need the timing marks on a 2002 mitsubishi lancer with a 20.L e

Mini marks on gears where the belt goes look at the grooves those are it only one groove per gear.

try reseting the immobiliser.?

8' DTDC

Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/mitsubishi/model/lancer/2004_mitsubishi_lancer_timing_belt_diagram_marks.htm

Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Here is a link that should help you get the wiring colors you asked for. Good luck and hope this helps. http://www.installdr.com/Harnesses/Mitsubishi-Wiring.pdf

Its not really easy to explain over the net. But the front engine cover has to be removed to gain acces to the front of the cams. You will need to remove most al of your belt drive accessories to do this. Its also critical to ensure you line up the timing marks correctly when re assembling (or timing will never be right). You may also want to replace the water pump at this time too...

try putting on a thicker rubber seat for your coil springs to add height. hope this helps

there should be a haynes book with that info at you parts store,,,$20

Here's the picture of the timing marks.