Cars & Trucks Logo

Related Topics:

Posted on Apr 30, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have telstar tx5 ghia 1990 2,2l 4 cilind automatic, power everithing,car is done 240000.yus wont start one mornig doing klik didn t start and couple time kliking alnaser (starter) and i have used cable to try start with other car, but no start,batery is ok.I have turned pulley motor is ok ,wasn't hard to turn, im thinking sometig wrong with power .Now there is no power in cabin ,nothing .power come on door lights an when I tried to turn key,no contact light ,power gone and nothing . nothing working no power on ignition nothing but battery is ok .Could it be shortcut,on starter ,or something wrong with ignition lock produce this.I've checked all fuses in cabine is ok please any advice,thank you

  • vlado1963 May 11, 2009

    problem negative ground conection on battery . wire was ochsidised .

×

1 Answer

Colin

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,584 Answers
  • Posted on Aug 11, 2009
Colin
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Aug 11, 2009
Answers
1584
Questions
0
Helped
469444
Points
4520

Hi
Easiest test is to reconnect jumper cables and switch lights on, if these work and no noise AT ALL from starter, NO clicking at all then could be the jumper cables are too light like most are. Try 2 sets of jumper cables. Ensure that the cables are correclty applied, Red to Red and the black is the last connection to a good steel part on your engine, NOT the battery.Always ensure the car being used to jump from is running at all times while cables are connected.When it starts remove this one FIRST also.

Cheers cbacer

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to disable ford telstar immobilizer

My Telstar mobelizer don't want to activate I want to disconnect it it's TX5 V6
2helpful
1answer

I need an under-dash ignition wiring diagram for my 1994 Ford Ghia Telstar TX5. I hear its the same as the Mazda 626 or MX-6 of the same year, is that correct?

mazda and ford used the same base vehicle ,the differences were cosmetic and badge swapping. A workshop manual for either vehicle should help you in this problem
0helpful
1answer

Why is my battery boiling over 94 Telstar tx5 ghia

Your alternator is overcharging the battery VERY VERY BADLY. DO NOT drive that car until the voltage regulator is fixed!
0helpful
1answer

How to do valve timing on Ford Telstar TX5?

1994 ford telstar tx5 cambelt timing marks, when the crank shaft is t.d.c where are the arrows on the cam ment to line upto?
3helpful
1answer

1990 ford telstar tx5 AT 2.2lt fuel injected motor

Is the spark plugs getting spark? Is it getting fuel?
1helpful
2answers
0helpful
1answer
0helpful
1answer

Help!!!

HOWS THE TIMING? WAS THIS CONVERSION DONE RECENTLY OR DID THE PROBLEM SUDDENLY OCCUR AFTER A WHILE OF THE CONVERSION? WHICH POWER CHAIN MODULE IS BEING USED? (COMPUTER)
Not finding what you are looking for?

358 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...