Plymouth Acclaim - Recent Questions, Troubleshooting & Support

Your water pump is driven by your timing belt which should be changed at same time unless it was done recently. If your still thinking of doing it, stop in at local parts store for info on what's involved, parts prices etc., and decide from there. I believe some even give you a step by step print out now too.

1994 Plymouth... | Answered on Mar 10, 2019

what do you mean by not turn on no power at all starter wont engage engine wont turn over or car wont start

1992 Plymouth... | Answered on Sep 30, 2018

Depends on what you mean by rubbing on wheel well?

if the wheel is bent inwards, so when the steering is set straight ahead, the damaged wheel is angled inwards or outwards then the tracking arm is bent!

if the wheel well has dropped on the damaged side then it probably is the suspension!

1992 Plymouth... | Answered on Sep 12, 2018

The best solution you'll get from books at

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicle- cars, atv, trucks. forklifts, boats, excavators etc.

1991 Plymouth... | Answered on Jun 13, 2018

There's this website
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, troubleshooting owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!

Plymouth Acclaim... | Answered on Mar 18, 2018

Double check you have connected all wires to battery and that it is connected the correct way round

1989 Plymouth... | Answered on Feb 02, 2018

You have a faulty body ground either loose or corroded. Find every body ground you can and clean and tighten them all.

1993 Plymouth... | Answered on Dec 19, 2017

Vapor lock or scale, would be my guess.

1994 Plymouth... | Answered on Oct 24, 2017

If the belts pull to one side, there is an alignment issue. Probably worn water pump bearing?

1991 Plymouth... | Answered on Sep 14, 2017

when you press the brake pedal the brake master cylinder vacuum booster takes vacuum away from the engine and that slows the idle speed just enough to trigger the low pressure oil light. Pull the oil pressure sending unit out and hook up an oil pressure test gage, if the pressure is above 15 PSI hot engine idle in drive replace the oil pressure sending unit.

1994 Plymouth... | Answered on Jul 06, 2017

run the fault codes .
indices that the ambient temp /baro sensors are not working and the ECm is not getting the signal to increase the fuel requirement ( same as pulling on the choke m)

1990 Plymouth... | Answered on Jun 12, 2017

you can buy a Haynes repair book in auto parts store also online at Haynes website...

1992 Plymouth... | Answered on May 16, 2017

Probably just adjustment.

Plymouth Acclaim... | Answered on May 15, 2017

Not finding what you are looking for?
Cars & Trucks Logo

-358 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Plymouth Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Plymouth Cars & Trucks

  • Forum

View Most Popular

  • Plymouth Cars & Trucks