20 Most Recent 1992 Toyota Pickup - Page 4 Questions & Answers

Sounds like you are not getting enough power so i would check spark plugs and wires first some times if you are not hitting on all cylinders your car/ truck won't run right do to lack of power the AC takes a lot of power to run it it could be that simple let me know if you need further help!

It could be that your radiator is clogged up. The temperature in my truck went considerable down and has stay that way after I changed the radiator. See if cleaning it with pressure water helps.

What can I do to my speedo cable brakes inside the outter cable

Mustang TPS Install How To Adjust Throttle Position Sensor Voltage

CHECK FOR THE ONE WAY ( CHECK ) VALVE WHICH IS BETWEEN THE SERVO AND THE INLET MANIFOLD ON THE PIPE CONNECTING BOTH.PROBABLY IS NOT WORKING PROPERLY.

take a good look for any vacuum leaks,

have you or anybody at pep boys changed the igniter and coil. if not try to find a used igniter and coil to test with, they're pricy. If it works replace with new parts.

It is probably in the switch itsef.Check bulbs and fuses before going to the switch.

Found on a '92 Toyota pickup w/V6, a bad/intermittent fuel pump relay. Had fuel rail pressure so fooled us initially, found by listening to pump run then quit, cycle key and pump would run again then quit, sometimes when trying to start, motor would start and run for a few seconds then quit, or not start at all, this created by intermittent relay operation. Need two people, one at passenger side by tank and other to work ignition switch. Relay located behind right, passenger kick panel, dealer item I believe about $28.00. Just another possibility.

have a load test done on the battery to check for failing cell. ensure that the posts and terminals are shiny clean and tight