Sharp Televison & Video - Recent Questions, Troubleshooting & Support

Binary file detecting in sharp aquos

Sharp Aquos... | Answered 2 days ago

This sounds like a programming error. Using the remote try to push and hold down the exit button. If this does not correct the problem, unplug the unit for 15-20 seconds. Plug unit back up and hit the start button. The unit will most likely reprogram you desired settings. I hope this helps with your problem.

Sharp Televison... | Answered on Feb 12, 2019

Could be an open internal fuse or failing power supply

Sharp Televison... | Answered on Feb 12, 2019

Open internal fuse or power supply failure

Sharp Televison... | Answered on Feb 07, 2019


Sharp Televison... | Answered on Feb 06, 2019

idk but it was hard finding the tv but anyway according to the manufacture they never labeled a button with "menu" and in the manual does not acknowledge a menu. good luck
look here on page 9

Sharp Televison... | Answered on Feb 03, 2019

Switch power off with the "On/Off" button on the television.

2) Hold down "MENU" and "VOLUME (-)" buttons on the TV and press on/off button to turn the TV on.

3) When you turn the TV is on a small K will appear on the left of the screen.

4) Then press "VOLUME (-)" and "CH (-)" press at the same time and the service the menu appears !!!

To exit simply turn the TV on and off and repeat step 2 to remove the K on the screen.

Sharp Televison... | Answered on Feb 03, 2019

Not finding what you are looking for?
Sharp Logo

Family Lines

13,261 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Cindy Wells

Level 3 Expert

5755 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides