Sharp Televison & Video - Page 9 - Recent Questions, Troubleshooting & Support

I have no idea why you would change the power board 3 times, this is the one board that can be tested with a simple multi meter, voltages are marked on the board, ifor future reference you know the 5 volt standby is working, next thing to test is the PS_ON pin coming from the main board, there should be about 3 volts there when the set is turned on, if no voltage replace the main board, if normal power-on voltage test the other rails, if all good the power board is working. Also a tcon board will never give the issues you have, a bad tcon will give distorted picture or blue screen without a picture. Now for what's wrong, according to service lit the blink code you have is bad inverter-backlight issue, since this set is LED it doesn't have an inverter so it's a LED backlight issue. Replacing the backlight strips should correct your issue, unfortunately on a set this size and with it being edge lit replacing the strips isn't a real easy job, this set has a diffusion panel behind the panel (screen) and it has to be replaced correctly or the picture won't look right, also with this size panel extreme care must be taken when handling the panel, suction cups work the best for removing and replacing it. Good luck!

Hi, if you still have the problem of unable to copy from video to dvd,then just follow these instructions, on the Remote, (when you have both the video tape that you wish to copy in the machine and the blank disc also in the machine ) Press the DUBBING Button(This is 2 buttons along from the Record button),almost immediately a message will pop up asking if you wish to copy VCR to DVD.
Hopefully this is of help to you. Regards. Gary

You have bad LED backlights

English!!

When the OPC is on, it will sense the surrounding light and automatically adjust the backlight brightness. Something of yours is obstructing the sensors. The reflection from a window or mirror will cause it to blink. You can shut it off by pressing menu, pictures, use arrow up or down and press OPC.

Sounds like a power supply issues. Check the output voltages are stable and correct value.

Might be a problem with its Power Supply Regulator Board [SMPS] inside. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

You need to update the firmware. You also need to know the model number of your bd player. Aquos is not enough.
Firmware is available here:
http://www.sharpusa.com/CustomerSupport/ProductDownloads.aspx

I OWN A BD-HP210U I DOWNLOADED THE LATEST FRAMEWARE BUT HERE'S THE THING, I LIVE IN COLOMBIA SO I DON'T IF IT IS A GOOD IDEA TO USE THE UPDATE, WHO CAN HELP HERE

Explain what you mean by "busted" capacitor. Is it buldged on the top?

https://elektrotanya.com/cgi-bin/download2.cgi?dk=wgzgtxz9xfakb6w5s2gbjalr7l6hmh579r0th7lfiongeyjc&fid=105643&file=sharp_aquos_lc32_40_46_52le700un.pdf Should be the faulty memory IC. Download its service manual by the above link, and refer it. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Due to the nature of players often if the optical Pickup unit inside is dirty or failing Blu-rays will not play but DVD's will.

You didn't mention the model but it's been common on Sharp sets to have bad backlights

Your TV is in Service Mode. You have to release it to normal mode. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

I suspect leaking capacitors in your power supply. If you have good hearing some people can hear a very high quiet pitched sound that leaking caps can sometimes make. If you know what caps are and can ID the power supply board, then leaking caps will show some brown tarry looking stuff around the top. you're on a fixit site so maybe youre brave enough to replace them yourself. I have done it and fixed that very same problem for like 2 dollars. just remember that power supplies will have high voltages present even when unplugged that are hot enough to kill you. so if you don't know what you're doing do not attempt this repair yourself.

https://www.fixya.com/support/r29790007-repairing_own_television

Sounds like bad LED backlights

I don't have a service manual for that set so I'm only able to help on a limited basis...Have you tried the flashlight test?...if the backlights are out then it could be a backlight driver board if it has one? or defective LEDs. See what you have for voltage going into the panel LED's

I have a Sharp Aquos LC-40E77UN with the same issue, and have tracked down a single burned capacitor at C7816 on the power supply board, and am looking for info on the capacitor in order to replace it. (Power supply: RDENCA354WJQZ / Delta DPS 208BPA). - Any help with a schematic would be appreciated!)Since you say the picture went out, it is possible that you might have the same problem, Bad/failed/leaking capacitors are, unfortunately, quite common in electronics. There are volumes of info available on the subject.Replacement power boards can also be purchased. One for my TV runs about $60 to $120 depending on used or new. Since I was able to see a good picture on mine for a few seconds, despite the burnt out capacitor, I'm opting to try and find/replace the cap myself (using the proper safety procedures), or at worst, have a repair done to the power supply.Backlights should typically last around 60,000 hours.

Yes you should replace