Linksys Computers & Internet - Answered Questions & Fixed Issues
How to setup linksys router
You can setup Linksys router without installation CD or software.Connect the computer to the router and open the setup page of the router.Change the Internet and wireless settings manually.I will suggest you a website on
How to setup Linksys wireless router.This website may help you installing your router
1/22/2024 10:37:14 AM •
Linksys...
•
Answered
on Jan 22, 2024
•
808 views
Slow downloading movies,grtting on internet
Try downloading movies when your pc is directly connected to your modem. If connection is very much faster then upgrade the firmware of the router.
Good Day
1/17/2023 2:38:46 AM •
Linksys...
•
Answered
on Jan 17, 2023
•
114 views
Modem working, router is not working
There may be various reasons if you're
Linksys router is not connecting to the internet. It might be possible that you are not using the correct way for establishing the connection between Linksys router and the internet. It is very easy to set up a Linksys router but a small error can cause interruptions, hence it is advised to follow all steps in a proper channel.Step 1: First of all, plug Linksys router into the power source. After this, take an ethernet cable and insert it into the cable modem port.Step 2: Take another ethernet cable and insert it into the "Internet port" that is present on the backside of Linksys router. Also, connect your system to Linksys router by using the ethernet cable. Make sure the ethernet cable which you are using is not torn or frayed.Step 3: Now, open your favorite web browser and type "192.168.1.1" in the address bar.Step 4 : In the next step, you have to enter login the following login details -Username - adminPassword - passwordStep 5: After logging into Linksys router web page, click on the Setup option and modify the router's name by default to something unique.Step 6: Next, save the settings and proceed to the next step.Step 7: Tap on the "Wireless" tab and modify the Wireless Network name to something unique. Go to the SSID broadcast option and set it as "Disable".Step 8: Now, select the "Wireless Security" sub-menu tab that is located at the top of the screen. Choose the "WEP" menu option from the security mode drop-down menu box.Step 9: Move to the Passphrase box and enter a unique password. Also, don't forget to note down on a piece of paper.Step 10: Choose the Generate menu button and save the settings.Step 11: Generally, Mac filtering is used to secure the router. To enable Mac filtering on Linksys router, choose "Wireless Mac Filter" and then tap on the "Enable" button.After this, tap on "Edit Mac Filter List " and enter the Mac address of your system and other devices that you want to connect from Linksys router's network.Step 12: Select the Administration menu tab and enter a new password in the "Router Password" field. Make sure this password differs from WEP encryption.Step 13: At last, confirm the changes by clicking on the Save button.After following all procedures, I hope you will 100% succeed in establishing the connection between Linksys router and your PC. If have any query or doubt regarding Linksys router setup process then directly talk to top-notched experts by making a call on Linksys Router services and resolve all technical tribulations.
4/15/2022 9:47:07 AM •
Linksys...
•
Answered
on Apr 15, 2022
•
540 views
Frontier router
Frontier Router Login at the bottom of the Network Connections window, just below the address bar. Select Wireless Properties from the menu. Locate the Network security key field on the Security tab. You'll see your Wi-Fi network password if you click the box for Show characters.
1/28/2022 7:46:04 AM •
Linksys...
•
Answered
on Jan 28, 2022
•
49 views
LINKSYS PAP2T - POWER LIGHT
the unit just only hang.. what you have to do is to unplug the unit within 5 mins.then after 5mins.try to plug it again..and your lynksys would be good again and ready fo your calls.. :)
1/10/2022 5:02:44 AM •
Linksys PAP2T
•
Answered
on Jan 10, 2022
•
2,665 views
How to create vlan
Virtual Local Area Network (VLAN) technology logically divides a physical LAN into multiple broadcast domains, each of which is called a VLAN.
Each VLAN functions as a separate broadcast domain, with devices in the same VLAN able to directly communicate with one another, while those in different VLANs cannot. As a result, broadcast packets are confined within a single VLAN.
My linksys wrt54g router isn't working right. I
If you mean not connecting to the internet. It could be because of incorrect internet settings or possibly the router was reset to factory default settings. If that's the case then all you need to do is access the router's user interface from any device connected to the router's network whether via wired or wireless connection, from any web browser by typing the default router's IP address which is 192.168.1.1, and you'll be prompted to enter the username and password which should be "admin" for both by default. in case you're unable to access the page for an incorrect password then you need to reset and reconfigure the router again. If you're unable to access an incorrect router address, try to check the router's IP address eg: if you're running Windows you can go running and type "cmd" go to command prompt and then type "ipconfig" you should be able to get the IP address default gateway (Either for WiFi or Ethernet, whatever you're connected to) which should be the router's IP address.Once you access the router's user interference you can contact your service provider and double-check the internet settings with them.If your device is not powering on it could be because of a faulty power adapter or maybe the device itself is bricked.Well, you may have such kind of problem with your Linksys router and we have a simple solution for fixing these problems.make sure your modem is properly connected to the router.power cycle your router and modem.once you will power cycle your devices, then you need to go ahead and reboot your router and modem.press and hold the factory restore button on your router for one minute and reboot your router again. now this will start working fine. if it is still not working then you may visit at
Linksys router troubleshooting problems.
8/12/2021 12:20:44 PM •
Linksys...
•
Answered
on Aug 12, 2021
•
160 views
How to Fix Linksys Router Error 2118?
This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.
7/29/2021 11:33:41 AM •
Linksys...
•
Answered
on Jul 29, 2021
•
1,446 views
How do i hook up
First of all, we all know that wifi means Wireless fidelity. So we can use it on our phones. it's like a wave. but when we want to connect our pc which doesn't have nic card then we have to use wire which connected to wifi\router. By the way, if we want to hook up a wireless router to a cable router we have to take some process. as like connect the router and the modem with an Ethernet cable. Most routers come packaged with a short Ethernet cable that you can use for this. otherwise, the isp provider gives us a short cable for pc and laptop when the internet connection complete with the router. then we can easily connect the wireless router to a cable router. Once the cable router is finished syncing-up and the cable router should provide an IP address to the wireless router.
https://www.allhdd.com/networking-devices/router/
12/31/2020 3:15:36 AM •
Linksys...
•
Answered
on Dec 31, 2020
•
684 views
How can i find out my pssword.
The default username and password for Linksys routers are:
Username: admin
Password: password
or
Username: admin
Password: admin
or
Username: <no username>
Password: password
If all of this fail you'll need to reset your linksys router so that it will also reset the password to the default. To reset you linksys router you can check it out on this website:
http://technicallyeasy.net/2008/01/how-to-reset-linksys-wrt54g-wireless/
Note: Reseting your router means it's going to reload the factory default settings and all of the settings that you made on your router will be deleted permanently.
3/20/2020 12:44:35 PM •
Linksys...
•
Answered
on Mar 20, 2020
•
1,150 views
Why is my Linksys WRT54G wireless-g router not being recognized anymore?
just fixed one yesterday.
the power pack was no good.AC wall wart,
power green LED blinked endless. and the white logo, LED is dead..
a new pack fixed it.
also the wrong pack used, ! do not mix them up. oops.
first year 54G, v1 uses 5vdc pack.
at v2, and up all want to 12vdc pack,
bottom sticker on above failed was v6.
you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.?
first the ethernet ports must work, or wifi is doomed.
2/18/2020 11:46:05 AM •
Linksys...
•
Answered
on Feb 18, 2020
•
117 views
Not finding what you are looking for?