IBM Recent Questions, Troubleshooting Help & Support

please chck if there is any other bootable device connected with the computer ie the printer,camera,usb pen drive , a cd/dvd or a floppy disc etc...
if they are connected then please try disconnecting them from the computer & then try turning it on....

please rate my suggestion...i will be glad....

You can upgrade you DVD burner firmware for a try, this way can fix many general problem. Or You may take a look at this step by step guide, it's regarding how to convert and burn movie to DVD. I followed it and successfully burned DVD to play on my home DVD player, it's easy to understand, I think it deserves a trial. http://www.best-dvd-burning-software.com/how-to-burn-avi-divx-movie-to-playable-dvd.html Hope it helps. Email me if you need further assistant.

Fixya Please delete user Adam for spam

Connecting boot devices and adapters - IBM server with 2008 r2 server

find the service manual yet>? it is type writer opted printer from year 1984 good luck finding manual , try googling , but 1984 is very very old.

IBM Netvista 6648 this PC, hyjacker, is very old. and not supported by IBM now. built by IBM in year 2000, 2 full decades ago why even try to use this,? it will never run windows 10. NO PCI express slots. no SATA ports. new BIOS would be hopeless, and not stated why. quote your manual: check out step 2:?

1. Power-off the computer.

2. Insert the flash update diskette into drive A.

3. Power-on the computer.

4. When the Update Utility appears; select the country/keyboard, then press

Enter.

5. If the computer serial number was previously recorded, the number is

displayed with an option to update it. Press Y to update the serial number.

6. Type the 7-digit serial number of the computer you are servicing, then

press Enter.

7. Follow the instructions on the screen to complete the flash (BIOS/VPD) update procedure.

Remove the print wheel and wash with soap and water. Turn the typewriter off and reinstall the print wheel,

Two things come to mind for this problem. First try pushing down firmly on both ends of the black rubber platen roller. Sometimes the black plastic latch on either side may break causing one side of the roller to lift up causing partial print. The other possibility is the ribbon is not lifting correctly. A technician can adjust the ribbon lift. After typing a few letters, take the ribbon out and look at the letters on the ribbon.Are they in the middle of the ribbon or are they at the top or bottom of the ribbon? middle of ribbon is correct.

Javier Yaguaracuto wants answers to this question Javier is this a current 2019 post>? it is not time stamped so...the answer is get the manual from IBM yet and read it.that is first. otherwise the answer will be HUGE.also what raid card inside , not the same.none stated by you, so no answer possible.my servers all have up to 10 choices on raid cards.you might read at IBM.comhttps://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=AN&subtype=CA&htmlfid=897/ENUS104-374it is 15 years old, why mess with such old IRONbuy dell R170 server, vastly newer and vast taken out of service now. (means cheap to buy) bang for the buck cheap. (your uses relic HDD)

unable to answer since no information given

Do you still have that scanner?

When I installed the Websphere Studio in the past on my system I installed DB2 first; the Websphere Studio was suppliment to the Universal Database. Remember this software was originally compiled for a IBM Unix System (AIX), the Websphere Studio has an integraded Apache Webserver with IBM and Sun Microsystems libraries; it just has been ported to run on a NT Kernel so that developers have access to the libraries. Make sure you have all the install files and the disc is not corrupted; use windows file and folder search targeting the CD drive to see if that binary file is on the disc. If it is on the disc try copying the files and folders to the hard drive; if the disc is corrupted the operation will fail.

Error code 0176 concerned with System Security. The system has been tampered with.

Try to enter the bios setup. Save the bios setting and exit. Lets see if it resolves your problem

Bad memory stick, possibly. Or maybe bad motherboard. try different memory, and try swapping to different slots.

how to repair Tape drive broken ts3100 ibm

dfqaef

Check CMOS and Memory Modules:::If the error message is "UNEXPECTED_KERNEL_MODE_TRAP," then it indicates you have problem with the memory of your computer. You need to check whether the SIMMs (Single Inline Memory Modules) are compatible and have the same speed. Secondly, also check whether you have set the CMOS (Complementary Metal Oxide Semiconductor) to the right amount of RAM. If these solutions do not work, you might have to replace memory in your computer....try to use system utility tool like Reginout.. Hope the problem is resolved.

Turn off, remove print wheel, turn on, turn off, reinstall print wheel, turn on. Make sure PROPORTIONAL SPACING is not selected.