The bios does not support the current stepping of Processor on Sockect 02
The "Basic Input Output System" aka BIOS does not support the current stepping of... Have you made sure virtualization is turned on in the BIOS and or likely EUFI if your working on newer systems. Also another couple settings there to consider for multicore processors to work at optimal performance. In addtion: your BIOS EUFI may have a update available and need that in order to work right and or even recognize the newer CPU's you installed
How to make multiple copies on IBM Wheelwriter 2
Two things. Multipart forms have a film on the top copy. Change the ribbon to another brand. Some work better than other. Probably if it printing some on the top copy, and it works on regular paper.
If it does work on regular paper its the ribbon may be old or change to different brand.
A work around is to use eraser on the form where you going to print. This will the remove the film, and allow to type there.
Show me the platen knob
One it could be a bad ribbon. the other is a bad print hammer, or is failing, there is platic cap on the selenoid that cracks after years.
Needs replaced most likely, Or the selenoid plunger is gummed up.
Not finding what you are looking for?