HEWLETT-PACKARD Office Equipment & Supplies - Page 4 - Recent Questions, Troubleshooting & Support
The printer takes a long time to print.
Buy a faster printer.
And, no, I'm not being a smart-aleck
HP rates this printer at up to 32 pages per minute -- in fast draft mode black ink only... But even their ratings show it takes over a minute per page when doing quality printing in color.
And those speed ratings are all "after first page" -- ALL printers take longer for the first page due to the time it takes for the computer to set up the page and process the information.
As the specs suggest, you can get faster printing in black-only instead of color and by choosing fast draft mode instead of quality or normal mode.
There is very little that could be wrong with the printer that would make it print slower than usual -- generally any problem would make it not print at all or cause it to print incorrectly. Generally speaking whatever speed you see is simply the speed of the printer itself based on the settings you have selected, the software you are using, and the speed of your computer.
You can refer to the information on the HP website. It is just possible that replacing the printer driver MIGHT help but other than that there simply isn't much you can do about the speed of this (or any) printer unless you want to choose a lower quality print setting.
HP Photosmart C5250 All in One Printer Product Information
How to replace dc controller board on hp cp5225n
Remove 5 screws from rear cover and remove it
Open the right door to expose 2 screws holding right cover, release tab and remove Right Cover
disconnect 22 cable connections and 6 flat cables from the DC Controller PCB
Disconnect 3 intermediary wire connections and release the cables from the cable guides on the top and right sides
remove 4 screws from the 4 corners of the DC Controller
Remove PCB
Reset count kit fuser
On your Control Panel press the HOME button once
then open
:
Admin
Manage Supplies
Reset Supplies
New Fuser Kit
Then use the Down ARROW to highlight YES then press OK
Cp 5525dn fuser error
Fuser needs to be replaced.
Part # RM1-6180-000CN
Open right door Fuser is at the top squeeze the 2 blue handle to release the fuser and pull straight out. Install new one by just sliding in place until it "clicks"
1606
It needs a new cartridge
49.4c02 error
49.4c.02 error is a firmware error.
Very rarely is a "49" error cause by hardware.
First remove the network or printer cable and reboot. If the printer comes ready the problem is with a print job waiting to be printed. Most likely a PDF file that the printer doesn't understand how to print.
On a windows machine Start, Devices and printers, locate your printer and double click then click on "What's printing" and delete any files waiting to be printer. ( You'll probably see one on the list with the word "error" on the line
Cp5225dn error 59.0240
This error is indicative of a motor not working properly.
Reseat all cartridges and drums and remove and reseat the belt.
I've seen the belt cause all kinds of issues.
CM1415fnw adf hinge
They are not spared. You have to replace the adf assembly - Part# CE538-60121
Not finding what you are looking for?