Ineed a manual for a MV1608WW
http://www.searspartsdirect.com/partsdirect/part-model/Goldstar-Parts/Microwave-Parts/user-manuals/manual-downloads/Model-MV1608WW/1366/0123370?modelNumber=MV1608WW&diagramPageId=&documentId=
4/13/2024 7:30:16 PM •
Goldstar...
•
Answered
on Apr 13, 2024
The dehumidifier runs and collects water. The
My only guess is that there must be a relay inside the control panel that (like many relays) arced ar one time and partially welded itself in the on position. Good quality relays are plated with a high temperature melting point metal to prevent this. Being LG is Goldstar (a Korean company) they most likely use the cheapest relays. To solve this issue the relay needs a hard knock to it. (Don't hit it so hard as to break the circuit-board) :)
11/11/2023 12:13:52 AM •
Goldstar...
•
Answered
on Nov 11, 2023
Goldstar GR-252 FDS fridge. Can I know what the capacity is?
Question edited for clarity.Goldstar are actually made by LG. Here are the specifications;LG Refrigerators GR-252240 Litres Double Door fridge, Inbuilt Stabilizer, Extra Large freezer, Fast freezing, Green Ion Door Cooling, 3 D cooling system, Available in platinum silver & white, 2 Year Warranty, Magic Crisper.
8/2/2023 2:27:09 PM •
Goldstar...
•
Answered
on Aug 02, 2023
Fan speeds, F1, F2, F3. What is the difference?
If the vents are closed , how is it circulating air at all? I just turned mine on for the summer, everything is nice and clean..(filter) Whats the best mode to put the setting on? Im in Kansas where its very humid right now..ughhh Thank you so very much! Kathy
What is the wattage for ER-4010
Most home Microwaves draw about 12-14 amps. You could figure your wattage at about 1680 watts. Calculated by factoring the voltage of most units 120V times the typical amperage draw of 12-14 amps. so wattage is volts times amps or (12-14 X 120) 1440-1680 watts
4/12/2020 10:09:45 PM •
Goldstar...
•
Answered
on Apr 12, 2020
No matter what DVD we put in, the player stays on "READ"
either the disc you inserted hasn't got a menu. the only thing DVD's do this is because there is no Menu provided in the DVD DISC. In the other case, where it remains "read" the disc might not be clean, scratched, dusty or simply incompatible with your DVD Player. Always clean discs before and after playing them in your DVD Player. Hope this helps, good luck!
Printed Circuit Board
Normaly they sell the complete circuit board for these units. If you have a part that is blown out, it is very probable that there are other parts that are damaged as well.
During warranty, they do not normaly fix these boards. They replace the board with a new one.
I would be looking at replacing the complete board. What will most likely happen and I have seen it often, is in this type of case, when a blown part is replaced, it blows again, because the parts that caused the failure must be also changed. I don't think you have the necessary tools, training, and design information about the circuit board to troubleshoot it properly to know the condition of all the other parts involved.
Sometimes there boards are rather expensive. You may find it more feasible to buy a new unit.
Jerry G.
Jerry G.
Not finding what you are looking for?