Goldstar Heating & Cooling - Recent Questions, Troubleshooting & Support

https://www.thespruce.com/how-to-clean-a-window-air-conditioner-unit-5191162

If the vents are closed , how is it circulating air at all? I just turned mine on for the summer, everything is nice and clean..(filter) Whats the best mode to put the setting on? Im in Kansas where its very humid right now..ughhh Thank you so very much! Kathy

Just high humidity.. Not a problem with the ac

f2 try and see which is faaster

If your blinking light is there but it is not turning on https://supportnumbers.net/aol-technical-support/ this will fix your issue. It is due to some internal problem in Goldstar split.

for a homeowner the first thing to check is the filter. also make sure the fan inside is running. once the coil freezes it does make it more difficult to push air so coil must thaw. don't continue to run unit if you see ice, you are only harming the system. if checks are good you likely have refrigerant issues and need a technician If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

f8 galanz

Typically there is a wiring diagram stamped right on the unit.just have to find If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Dry means that the air is dehumidified, not heated or cooled. Cool means the temperature is reduced.

My air conditioner is reading E3, it is a portable Goldstar.

normally the adjustment was on the knob on the front 40 degrees f is equal to 4.4 c which is fridge temperature and 40 degrees c = 104 f air conditioners run best at 25 c =77f so it is pointless getting it any lower as you will be too cold to be comfortable

What city do you live in?