Canon Eos - Popular Questions, Answers, Tips & Manuals

Blue Pictures mean that you are on the Manual Setting and you have White Balance set to Warm Florescent. Number 1 tip, read the manual twice with the camera in your lap. For the lines, it needs to go back to the eBay seller, because it is broken, or you send it to a Canon Service Centre.

Hi, please make sure that canon isn't blocking certain batteries from being used. You can also check that the batteries work by placing them into other devices and testing them. If you have an adapter please use that to attempt to power the camera. Thank you.

Question edited for clarity and correct Maker name and model detail and (what it is). Question moved from MISC to correct category. Solution

1. Set the camera's power switch to <ON>.
2. Press the <MENU> button to display the menu screen.
3. Press the < > button and select the [ ] tab.
4. Turn the < > dial and select the [ ] tab.
5. Turn the < > dial to select [Language ], then press < >.
6. Turn the < > dial to select the language.

More items...

Which languages can be displayed? (EOS 7D Mark II)

Videos as well https://www.google.com/search?q=how+to+change+language+on+canon+7d+mark+ii ..

https://youtu.be/EQ9XFSV3Mt4

How old is the battery? They will only take a certain number of charge and discharge cycles. When worn out, they will charge, but fail very quickly and always in the middle of use. https://www.walmart.ca/en/ip/2x-Pack-Canon-EOS-Rebel-XS-Battery-Charger-Replacement-for-Canon-LP-E5-Digital-Camera-Battery-and-Charger-1200mAh-7-4V-Lithium-Ion/PRD1R0BZPXKL7K5 https://www.google.com/search?q=canon+eos+rebel+xs+battery ..

Thank you for sharing superb information's. Your web-site is so cool cctv camera installation services best cctv installation in Hyderabad

Nothing wrong just messed up the settings Return them all to factory settings.

First of all, un-signed questions will attract few or no help so next time do it right. Secondly, your camera needs service. You can't do much on your own so send it off to a service provider.

Usually there is a menu button that toggles between settings info and live image?

Check you have the correct time zone set - setup tab 2

Maximum for counter is 999. Counter is showing 999 because you have space available for more than 999 shots. If you've got a very large memory card it may tke quite some time to get below 999.

You do not need any sort ZOOM BROWSER. Try Picasa from Google. It is free and works way better than any OEM proprietal browser.

Please give more details about camera & lens make type so that solution can be given.

Yes - internal damage caused when it struck the table.

U just nd to switch it of after sometime then charge after it ful u can open

The only thing I can think of is a card format. Do it once in the computer and once in the camera. After that do a factory reset for the camera settings then set the image quality to Large jpegs. Also try Googling the strange file extensions a see what info you can get.

Most definitely battery grip. Prone to a phenomenon know as 'flexing'. The contacts on the grip fail to connect to camera's contacts. Can cause other problems such as switching on and off when you least expect it. I got sick of going thru about two grips for every camera so went with 1D/1Ds series. You'll hear people say 'stick with Canon grips' blahhh(!) too ****** expensive and are prone to the same problem. Can't be helped when you hand hold a camera+grip for long periods - the warmth of your hands can heat up (warp) the plastics and it's all held 'together' by one little screw in a tripod mount (!)
You could 'try' removing the grip, leave it off for say a week. I don't know why it's how, but if always works like new when you put it on again. Until....it starts playing up again. :)
OEM, 3RD party... OTY. For the price of one Canon I could get two cheapies. Always had the 1D (classic) and ahem...still have it! So I stuck with the series (1D IV, 1Ds2) Still holding onto my 7D w/grip (3rd party) though.

A plastic piece is not an issue in an electronic device. As long as the piece is not part of the SD card holder slot.

Try a factory reset. In the menu go to the third spanner and select 'Clear settings' To pop up the flash put the camera in manual mode (M) and press the flash release button and it should pop up.

Bad Circuit board in the lens, Needs to be replace by a Repair Tech, tccamerarepair.com