Dehumidifiers - Page 3 - Popular Questions, Answers, Tips & Manuals

Check that the hose connection is secure and that there aren't any kinks or blockage in the hose. The hose should always slope downward not go vertical or in an upward direction. If the hose is clean and water flows out freely, check the placement of the unit. The unit not being level could be another factor as to why it's collecting water in the bucket and not out of the drain hose. Make sure that the unit is level. If there is a slight slope to the floor, adjust the unit so that the hose is closest to the drain. In units that were stored for the winter, for an extended period of time or in a highly dusty area, there may be grime build up in the main water outlet that connects to the drain accessories. Use a pipe cleaner to help clear the buildup by inserting the pipe cleaner in the main water outlet.

posted 3 times an not add or edit the first, why? get the the manual from the makers web site and read it. or ask them for help or call for service

It appears to be a Humidity Sensor error. https://www.google.com/search?q=HiSense+30+Dehumidifier+F-9+error ..

Question edited to add Dehumidifier details.No spares available. You can seal the threads with PTFE tape which make the threads thicker, or try and fix with epoxy resin. Or can you drill it out and put in a plumbing fitting. The threaded items should be a standard size.https://www.searspartsdirect.com/model/uffmiptp6v-001428/frigidaire-fdl50k1-dehumidifier-parts..

Screws are normally hidden under the feet, under plastic plugs or under rounded screw covers. https://www.google.com/search?q=soleusair+hmt-d70eip-a+dehumidifier+leaks ..

If the air conditioner works and is blowing out super chilled air, then the dehumidifier function should work. The function takes in warm moist air and passes it over plates which are marginally colder than the ambient air. The air condenses and drips into a collection tank, or some have drain hose for putting into a floor drain. After 8 years, it may need service and gassing up, but you may also have drier air than you think. Whether is works in AC Mode is the key.

Thermostat probe sensor code

Page 18 of the manual says it is a 'parameter'. http://www.gullbergjansson.no/fileadmin/user_upload/Dokument/manualer/Avfuktare/Gullberg___Jansson_Manual_Avfuktare_till_inomhuspool_DP-serien.pdf Press CTRL+F and type 'C1' than press enter. There are 3 references to C1. ..

It sounds like it needs servicing and recharging with refrigerant gas. It works by running the moist air over refrigerated elements where the moisture condenses and drips into the tank. Make sure you are on the right setting, most have 'blow air, remove moisture, and A/C'..

google MDK-65AEN1-BA9 manual they are readily available

Question edited for clarity. Question moved from Spanish car company Seat (See-At). Is it less than a year old? You can claim on the warranty. The water bucket seems to have to parts that might snag, the handle and the float arrangement. It just slides in on two tracks. If there is no water in in, tip it onto its back and see if it is mis-tracked. https://na2.electroluxmedia.com/XL/Electrolux/Electrolux%20Assets/images/Product%20Photography/FFAD2233W1-F6_944.jpg?impolicy=dimensions&imwidth=1400 https://www.frigidaire.ca/Home-Comfort/Dehumidifiers/FFAD2233W1/ Stuck Bucket. https://www.google.com/search?q=frigidaire+ffad2233w1+dehumidifier+bucket+stuck ..

I have the same issue, all 4 wires have voltage for my connector, I would assume one would be ground but it seems that is not the case unless that is the issue. Black wire I would assume would be ground but it isnt. If anyone has a wiring diagram for these units I could figure it out but I can only go so far when you are operating in the dark.

Impossible to diagnose without a full make and model, but likely a sensor issue. Your Google search query would be make model error code E9 https://www.google.com/search?q=dehumidifier+code+e9 ..

normal it is an AC not dehumidifier. there is no humidity sensor, it operated on room temp not humidity. https://www.manualslib.com/manual/1015047/Challenge-414-0038.html#manual

With your unit switched off, vacuum them with a brush attachment. If still dirty, you can spray with a degreasant spray and then gently rinse with a towel under the coils. Dry with a hair dryer. That is how refrigeration techs do it.

If you alter the thermostat on your MYSTERY appliance, you should hear the compressor cut in. make model (what it is) an ALL questions please.

It works by chilling a set of fins like a freezer. It probably needs gas. Get inside it and feel the evaporator with it running. Keep away from the fan though.

see page 22 manual https://sps-support.honeywell.com/s/article/What-are-the-error-codes-in-an-E3-SA https://www.haierappliances.com/support/support-content/34659

Clear the blockage and check the flow through the filter.

The pump may have simply failed.