Maytag Dehumidifiers - Popular Questions, Answers, Tips & Manuals
My Maytag dehumidifier filter doesn't ever get dirty why
Unless you have it installed in an especially dirty area, the filter hardly ever gets any appreciable accumulation of dust and dirt. The manufacturer turns on the clean filter reminder after so many hours of operation. Never is it indicative of detected dirt clogging filter. Just hit the filter reset button on the control panel
7/10/2021 8:49:06 PM •
Maytag...
•
102 views • 0 helpful votes
How do I know what year model portable dehumidifier I have?
Contact Maytag to ask.https://www.maytag.com/services/contact-us.html Check if it was recalled as were many dehumidifiers due to a fire hazard, as it did not appear in lists on the internet, but that is something to be certain about.FIXYA questions in 2010 suggest that model number was manufactured at least that many years ago.
10/26/2017 4:09:32 AM •
Maytag...
•
276 views • 0 helpful votes
Humidity sensor
It may be right. Are you sure you need dehumidification?
Put a free-standing humidity meter near the unit to check.
If you still want to run the dehum, take the humidity sensor out of the line and control the unit with a timer.
Why did it stop condensing water?
The condenser can only remove humidity if there is still humidity in the air. What's your Relative Humidity? A manual sling psychrometer is cheap enough to check it.
Why does my dehumidifer not work?
If it is not running because it thinks the bucket is full even when it isn't, the problem is that the float is broken or jammed. A replacement is no longer available, but you can find the small switch and tape it so it always stays on. It won't shut off when the bucket is full, but it will run. This assumes all the other panel lights come on properly - you didn't provide much detail about what works and what doesn't work.
How do I empty the water tray on a maytag dehumidifier
Put machine on pause, On the front of your machine you'll see a seam that is the separation of the tank, gently put your hands on the side of the machine and you'll see and feel indentations of where you have to gently pull forward until you feel the tank coming off, make sure when you pull it is with equal pressure and you can use your thumbs to hold the machine from rolling when you take the tank off. ( it is a two handed operation), get ready for the tank coming out because depending on the amount of water in it, it may be heavy.
If your still stumped, I guess I can video it being done?? Good luck and let me know how it goes!
Not finding what you are looking for?