Questions & Answers for: video signal projectors

...signal not make the transition from component video cable to hdmi? Thanks for your help!Dave it sounds like the A/V reciever does not upconvert the component signal to HDMI. Not many do. The Marantz ...

...video composite and RGA component cables. I just don't understand why the signal from the computer will still work. I thought it might be a fan issue or a mainboard issue. Laura Ellis It appears the ...

...signal it seems as the laptop does change to the other monitor output. I have used the computer/s-video/video/dvi/ycpbr settings. The cable I am using is a hdmi one into the projector with red green ...

...video? the signal might not match. there might be an auto adjust on the projector to read and match the elmo's resolution. if not, the elmo may have an issue sending a powerful enough signal to the ...

Video input port (yellow RCA) is good, and that the cables are good. Also, the projector works fine with input from the Computer/Component input. if the video signal is HD, the projector can't read it

...signal from the computer. The video returns as soon as the rgb button is selected. This may happen several times in a short period of time or it may wait for an hour or so before the video goes off. ...

...longer projects Is projector went down or just lost signal? If it's losing signal it can because your computer's video card or projector's.. Try to wiev from only projector , not with both of

why is the projector looking for a signal? Need input signal from Computer or DVD player. You will have to select RGB or Video in the projector menu.

...later in the video path than the input signal. Try a direct connect from the signal source (other side of the receiver) to the projector. Again, if that works, then the problem is the receiver. ...

...video signal to your SVGA Out from the laptop (for sure) and it is in fact in that video output mode. Once you're sure you have a signal going out of laptop through that port , go to your projector ...