Questions & Answers for: printer overheating

...printer and i'm having overheating issues with the head. I've hardly used it, but when i do it prints badly and says that the 'printhead is overheating'. it's not as if i'm printing hundreds of ...

...printer mechanism (2) cannot print properly because of print head overheating (3) "8 flashes" waste ink absorber almost full, contact Customer Care Center. What do I do next? first of all ...

printer is very hot on the back even when not used in hours low voltage power sully and fuser need replacing.fuser is overheating. mine is the same way, to solve this I elevated the bottum by 2 inches

...to be a common problem for the 2510 and the 2010. Fan your paper from all four sides before using it. Also, make sure your printer isn't overheating, as overheated paper seems to make it jam as ...

...printer- print head is overheating Canon PIXMA iP3000 - print head is overheating with whisps of smoke. Error message received #5200. Next day, the printer won't even turn on. Am I TOAST yet? Try to ...

...printer pauses while printing and the menu light start to flicker.It resumes printing after a while. Why? The printhead has some thermisters in and it is either actually overheating or a faulty ...

Does not go. Does not want to print. Turns on. Makes noise. overheated You may want to open it up and clean it out, (dust etc) it may having a thermo error thus shutting down to prevent any ...

...printer, it is flashing P08. What does this mean? Any advice? This is a Print Head Overheating Error. You are probably printing a lot of photos all in one go and the head is overheating. Try again ...

I have an Canon MP 830 with error 5200. What can I do to fix it myself? It started out printer head and I have taken it out and rinsed it and let it dry naturally. It is saying error print head and ...

...overheating in the printer can stop the printing to take place. This can become a frustrating factor for a user. Solution to fix Canon Printer Error E02:- 1. Switch off the printer. 2. Soon, open up ...