...prime it using the priming bulb that came with it. Instructions are in the manual. Remove water tank. Fill priming bulb. Hold priming bulb on water inlet. They don't inter-connect, so just hold it on ...
...prime the bulb it sucks gas from the tank with the small tube, any excess gassed pumped will be fed back to the carb via the big tube leading to the tank. If you prime it and the bulb stays ...
Question about 25cc Gas Line Trimmer
...prime bulb. When I hand prime the carb. it starts and then stops.When I prime with the prime bulb it won't start at all.The prime bulb is pushing air,but no gas? I cleaned the carb.but it still won't ...
BULB WONT PRIME I CAN'T SEEM TO GET THE PRIMER BULB TO PRIME ON MY HOMELITE HB180 LEAF BLOWER. I HAVE REPLACED THE PRIMER BULB, FUEL FILTER IN TANK ALL THE FUEL LINES AND PUT A CARB KIT ON. IT STARTED
2150 chainsaw prime bulb The prime bulb was brittle and broke into pieces. I need to replace the prime bulb. You can use this site to find a Poulan service center or order parts: http://www.poulan.com
Question about 30cc 17" String Trimmer Zrry30530 Wcurve Shaft
prime bulb Ryobi 31cc 17" trimmer. When I pump the prime bulb no fuel passes through lines. Like there was no fuel in tank. I checked lines/bulb... no leaks... Help! need to relace the prime line
...greater than one that has no positive divisors other than one and itself. Since one obviously is not greater than one, it is not a prime number. Prime bulb may a hole or crack. You need a new
Question about 30cc 17" String Trimmer Zrry30530 Wcurve Shaft
...prime bulb looses pressure and first start is hard. I have to remove fuel line from filter and cover with thumb prime re install then first start takes time. replaced filter. have not found leak in ...
Question about 30cc 17" String Trimmer Zrry30530 Wcurve Shaft
...bulb does not open to prime any more.I have to wait at least 3minutes,for one time purge.please help get a new primer bulb and diaghram and rebuild your carb or buy a new carb,same price,gas and ...
Question about 30cc 17" String Trimmer Zrry30530 Wcurve Shaft
How do I find the correct priming bulb and how do I replace the priming bulb? priming bulbs are normally held in place by a ring around the base with 2 or three screws remove that ring and the bulb ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions