Question about ImageRUNNER 1670F Copier
...paper feeder. This problem began after a paper started into the document feeder and I stopped it. After this I began to get a solid line when I use the document paper feeder. I do not get this line ...
Question about PIXMA MP530 All-In-One InkJet Printer
paper path from top feeder. Sometimes is a transparent plastic film need to be replace cause a scratch and sometimes is dirt or other obstruction like dust or liquid paper still not dry when scanned a
Question about DR-9080C Path-Through Scanner
...feeder. Thanks. There is a paper sensor just under the rolers in the lifting tray. Clean the area thoroughly with a damp cloth. Keep some sheets and try ]count only'. If it works then the sensor is ...
Question about MultiPASS MP730 All-In-One InkJet Printer
...paper feeder on the back. You can have problems with both. The sheet feeder on top. If the problem is things go through somewhat sideways, and if this is the problem, stuff some postit notes between ...
Question about ImageCLASS D1120 All-In-One Laser Printer
...feeder paper jam, Hi Try this method To "Settings/Registration Table" You can specify the method for restarting scanning of documents when a paper jam occurs in the feeder. For information on the ...
...paper A4 in feeder and hit green key it's work and read it A4 and print from cassette 1 when i put paper A3 in feeder and hit green key it's work and read it A3and print from cassette ...
Question about Pixma Mg5250 Imageclass Inkjet Scan Copy 9600 X 2400 Dpi Sc
...paper feeder? Could be just a little piece of paper or a staple is blocking proper functioning of the feeder. Keep the paper try clean and take care you never drop or leave anything in the printer, ...
paper feeder not working When I put a paper in the top feeder to scan it says, "Please wait a while". something could have fallen into the printer and gotten stuck (affecting input paper sensor)
Question about Pixma MX922 Inkjet All-in-One Printer 6992B002
paper copying or on scan image when using the scan bed. When you get marks from the document feeder it is dirt on the narrow optical strip that collects the image. Hinge up the rectangular lump at the
Question about Pixma MX922 Inkjet All-in-One Printer 6992B002
...express origina is in the feeder even if there is no paper in the feeder so it does not copy nor scan please help me THE ORIGINAL NEEDS TO BE SCANNED WITH SCANNER WHICH IS NOT THRU THE FEED ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions