Questions & Answers for: kitchenaid coffee grinder shear pin

Question about A-9 Electric Burr Grinder

Broken shear pin in kitchenaid A9 Coffee Grinder

...kitchenaid A9 Coffee Grinder I disassembled the unit and found the broken pin, I need to know, where I can find the replacement pin. Thanks I was able to find 3/32 x 1/2 inch spring pins at a local ...

Question about A-9 Electric Burr Grinder

1 Answer

A-9 Grinder Diagram

...the grinder and parts? - Chris. Search online for "Kitchenaid 8204548" that's the parts list. It should take you to a Sears page with the parts you need. The part number for the Acorn Nut is

Question about A-9 Electric Burr Grinder

1 Answer

Motor works, will not grind, need to replace

motor works, will not grind, need to replace burr,is it a simple fix? sounds like a broken shear pin..

Question about KCGB200TG Grinder

1 Answer

My grinder is running but not grinding. I've

My grinder is running but not grinding. I've vacuumed it out and removed all the excess grounds, reloaded it and it just whirrs without grinding a bean. sounds like a broken shear pin

Question about A-9 Electric Burr Grinder

1 Answer

It stopped grinding half way through a grinding

It stopped grinding half way through a grinding this morning. The sound changed - it kept working but nothing was being ground. sounds like the shear pin is broken

Question about A-9 Electric Burr Grinder

1 Answer

I need to order the

I need to order the acorn nut for a kitchenaid A-9 burr coffee grinder I found this while searching for shear pins http://www.partselect.com/PS984110-Whirlpool-9707016-Nut-Acorn.htm

Question about A-9 Electric Burr Grinder

1 Answer

Motor quit running

...designed to shear in case a pebble got in the coffee before damage could occur Third worn motor brushes. My motor was intermittent and found the brushes down to nothing. Now I am looking for new ...

Question about A-9 Electric Burr Grinder

1 Answer

Reach/remove pin.

...KitchenAid A-9 is KCG200WH1. Should I take the bottom of the machine off, then will it pull out from below? Frustrating. I have seen pictures of the pin as it should be, but the shaft doesn't look as ...

Question about A-9 Electric Burr Grinder

1 Answer

My A-9 KA coffee mills are working perfectly. 2003 never quits, 2006 was a royal pain and burrs/pin replaced and working perfectly. Now, I have a 2004 used for decaf, actual use from purchase about

...coffee mills are working perfectly. 2003 never quits, 2006 was a royal pain and burrs/pin replaced and working perfectly. Now, I have a 2004 used for decaf, actual use from purchase about BTW, a call ...