Questions & Answers for: jura open tap

jura capresso the machine asks to open tap ,i don't know how If you gind too fine, it will overload the pump and result in the "open tap" a few seconds into brew. Rinse and gind coarser to clear out ...

...open tap" message My Jura Imressa is almost 1 year old. It has worked perfectly until recently. Each time I try to brew a cup it will grind and act like it is going to work, but then only a couple of ...

open tap - filling system - close tap I'm in the same loop , i have an ENA5 jura.. Try using warm water in the watertank, important that the water is not too hot, it can cause leakage in the o-rings ...

...open and close tap. We called the support lines 3 times at Jura and we are getting what apears to be a run around. They are claiming that the machine needs cleaning on the coffe beans used are no ...

...open tap and when I open tap, its says close tap. I have unplugged it and it still continues the loop. I have had this happen when trying to change filters and go through the rinse procedure. For me ...

tap says open on model jura e75 Hi, I made a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Impressa E75 say close tap, where is tap please Only just bought machine, and cannot get it to work The tap is the dial on the left turn it, then it will turn the tap off. If it is repeating this

Jura Capressa E-8 machine. I followed instructions after changing the filter. I opened tap-machine stated that it was filling system- I closed tap when instruction. The open tap remained on because no

...a Jura Impressa F7? Tried a paper clip, better but still drips slowly from one side. Open the whole machine and you'll find the spout. Tighten up the nut there, the washer is like a tap thats ...

...Jura Ena 5 is stuck in a open tap request. It will not brew or rinse. I bought the machine second hand and it worked great for 4 months. Slowly the unit started to not perform as well. I noticed the ...