Questions & Answers for: fuser open heat error xerox

...Open Heat error on my xerox phaser 3200 mp printer / fax machine. I have to keep powering it off then back on and it goes away for a little while then comes back. One of 2 things is happening, Either ...

...Error Fuser Temp. Printer Error Fuser Temp. fuser Temp printer error problem.please give me the solution. hpaser 3100 mfp  printer error fuser temp fuser reset menu * # ok 1 ok stop menu # PRESS ...

error Fuser temp"...Help please your xerox phaser is in fuser light is checked is not courently okthis parts is damaze? then changing the fuser temp and new added. No, it does not solve the problem...

...error for xerox 3100mfp this printer does not initialize at all and giving me error fuser temperature kindly check externally the fuser is heating or not. i SUSPECT THE FUSER MIGHT BE

...fuser low heat error on my xerox phaser 3500 You will need to replace the fuser. You may want to look and see if you just have a piece of paper wrapped around the roll, but most likely the heating ...

...due to what problem this message arises. The model name is Phaser 3100 MFP Product. Please help me with a solution. Disassemble fuser and inspect thermistor and heat lamp. Then replace broken

xerox phaser 3200mfp printer constantly running warm up procedure. Fuser senser problem check senser in working properly or not open heat error

my xerox phaser 3100 MFP is coming with printer error fuser temp. what can i do? check the thermistor, thermostat and heat lamp in fuser

open heat error open heat eror Open heat error is caused by a bad fuser. Replace the fuser assembly.

...fuser door is open. Where is the fuser door? The fuser door is at the back of the machine. Open the door, pull down and close firmly shut. If the error persists it could be that the sensor has gone ...