...C1 on the schematic). Replaced it, reassembled the projector (3 interlocks don't 'cha know) and it came up just fine. Doug. If you have the schematics look on the power supply board circuit. It looks ...
Question about XL8U Multimedia Projector
...C1 on the schematic). Replaced it, reassembled the projector (3 interlocks don't 'cha know) and it came up just fine. If your comfortable w/surface mount troubleshooting and soldering, download the ...
Question about XL8U Multimedia Projector
...projector the light will go out for a couple seconds and then on again. The fan will not turn on and 95% of the time the lamp will not turn on. The other 5% of the time the lamp flickers for a second ...
Question about MultiSync VT45 Multimedia Projector
...projector. Would not POWER ON. LAMP was replaced with a new one the power supply on that model seem to go bad after a while. the caps aren't properly reted it's power needs. they dry up. if you are ...
Question about (CLMPF0044DE01) Projector Lamp for XV-C1
...projector model xv-c1 I need a lamp for this model where can i get it and how much the cost? Original lamp USD150 Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD ...
Question about (CLMPF0044DE01) Projector Lamp for XV-C1
I need to buy a lamp for my Sharp projector http://www.shopvsc.com/Sharp-Replacement-Projector-Lamps-s/130234.htm?searching=Y&sort=7&cat=130234&show=50&page=1&f-XV-C1E=130203
eroor code on Sharp ARC260M copier eroor code on sharpe AR260m copier Please report the error code e.g., F1-47, C1-30, H5-01 and so on.
Question about (CLMPF0044DE01) Projector Lamp for XV-C1
...C1 hd tv. The picture is rolling horizontally like the old film in a projector would do when it would get out of time. The picture would show half screen. The top half is at the bottom and the lower ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions