Questions & Answers for: Frigidaire lever switch

See if you can reach up or look inside to see if the water lever is actually pushing the door mounted switch in, may be able to press switch with your finger if you can reach it or with a pencil, etc

...we didn't replace that. Any ideas? You do not have the actuator postioned correctly on the switch inside the door. The lever has to press up against the switch when you push it. Re-postion the

wil spin after i take off the panel locate the pump and then what? unscrew the nozzle connected to the pump? lid switch also function as safety lever lock. its a 2 way lever contact switch. replace it

...switch. If the lever is broken, the switch would not activate and the dryer would not start. Replace the lever, if broken. Note: Door switch actuator lever usually comes with the door switch assembly ...

...switch. If the lever is broken, the switch will not activate and the dryer will not start. Replace the lever, if broken. Note: Door switch actuator lever usually comes with the door switch assembly ...

...ice comes on and when pressing the ice lever the water comes on. The switch is defective or the switching mechanism isn't working. Gently pry the dispenser cover off to access the screws to get to

...switch. If the lever is broken, the switch would not activate and the dryer would not start. Replace the lever, if broken. Note: Door switch actuator lever usually comes with the door switch assembly ...

...switch back and forth between ice cubes or crushed ice.. I can select either one by moving the rod either over the lever in the back of the freezer for cubed I e or leave it under the lever for ...

...the lever off. Depending on the model, you can pop off the front cover where the control lever (wire) goes. Make sure there isn't any ice formed around the micro switch that will keep it turned

...lever up and down when you switch from crushed to cubed it changes the position of that lever. Open the door and press the light switch to turn off the light and have someone pressed the dispense ice ...