I understand you are receiving an "SY EF" code on your Frigidaire refrigerator, model# FRS3R5EMB. The "SY EF" code stands for system error with the evaporator fan. This possibly means that there is something going on with your evaporator fan or it could possibly be a false error code. . I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully.
Did you check the motor and/or damper mechanism that directs cold freezer air into the refrigerator portion. If that is messed up the freezer is ok but fridge is ng. Also look at door seals for proper sealing.
I have had the same problem, and can't fix it at the refrigerator. You need an presure reglator or bladder on your hot water heater. when you have to much pressure it usually starts causeing problems at the hot water heater with leaks and works its way down in other areas of the house. We put a regulator at our water meter at first and it did not help.. if it is leaking at your fidge, you may want to check other appliances.
Hope this helps
What is the water line that you would like to install is it attaching to the refrigerator your question or is it a water line that goes under the refrigerator and to the dispenser or the ice maker? Is the model number of the refrigerator correct within your post? Appliance 911 Sea Breeze
Hello Chuck, thank you for your post!
From the information you have provided you are receiving low water pressure at the dispenser on your Frigidaire refrigerator. This could be due to a dirty or clogged filter and I would check to see when you last replaced it. I have researched model FRS3R5EMB and show the water filter is part number WFCB.
If you have changed your filter within the past six or nine months the low pressure could be due to an obstruction within the water line or an issue within the dispenser. Since it could be anyone of these underlying issues I would recommend having a professional technician out to perform a proper diagnosis and repair. This will help you to avoid any unnecessary part purchases. I hope that this information is helpful to you. -Matt
Hello Gladys, thanks for your submission!
I understand that your Frigidaire refrigerator is not sealing properly. You could be experiencing an issue with the gasket or the hinges. I would suggest checking the door hinges to assure that they are secure in position. You can also use a dollar bill to test the door gasket. Place a dollar bill in between the door and the body of the refrigerator. If the dollar bill pulls out with no to little resistance, you may need to replace the door gasket. I hope that this information is helpful to your repair. -Matt
Sure you can just click Here=> FRS3R5EMB You also can find wiring diagrams and all models on this=> Page and on this page everyone can find all manuals for Frididare Products here=> Frigidare Product Manuals