I have just purchased a wireless doorbell but it does not explain how to change the tune, please help.

Larry, did your dealer check to see if the mounts for the bearings in the housing were warped? If your brush is not sitting square with the housing, that could cause the vacuum to pull to one side. Depending on what model you have and how old it is and whether or not you have had regular tune ups, it might still be under warranty and if the housing is warped, they can replace that for you. Hope this helps!

Hi

To fix the issue you need to remove the batterys from both the bell push and the bell unit for 10 mins, then replace the batterys and then push the bell push so it can switch channels and be different from the house down the road

Hello,

We have actually recorded a very informative do it your self video on how to replace the fan on a Kirby Generation upright.

The video is a two part video, but this explains step by step how to remove the old fan, and put the new one on.

If you need to purchase a new fan assembly, here's a link to the Fan assembly for your Kirby G4. Unfortunately you may only purchase them as a complete assembly:
Genuine Kirby Vacuum Fan. Kirby Part # 119096S

Here's the videos showing how to replace the fan:

Part 1:

Part 2:

Hopefully this helps you with your problem! If this did help, please be so kind and rate the repair, or leave feedback for me. This is very appreciated by the Fixya community when someone is able to answer your question, and assures that experts continue to answer free questions, instead of just the premium paid questions.

Thanks again!

Chris Jones
GoVacuum.com

Hi There,

Here's a helpful video that we recorded showing you exactly how to replace the belt on the Kirby Generation vacuums, step by step. This video will also show you how to do the basic maintenance on the roller brush to prolong the life of the belt as long as possible.

If you need to still purchase the belt for your Kirby G5, here's a direct link to our website to the belt that your machine uses:
Kirby G4 & G5 Vacuum Cleaner Belt. Kirby Part # 301291A

Here's the video repair presentation:


Please feel free to ask any follow up questions if you need help, I'm always more then happy to answer any question you may have. If you found this helpful, please be so kind and leave feedback, and / or rate my repair helpful.

This is greatly appreciated, and keeps Fixya experts continue posting free repair advice here on Fixya.

Thanks so much,

Chris Jones
GoVacuum.com

Hi There,

Here's a link to a very helpful video that explains step by step the exact procedure to convert your Kirby into a carpet shampooer.

If you ever need to purchase the dry foam shampoo made specifically for Kirby vacuums, we have a great selection and prices (free shipping both ways):
Kirby Carpet Shampoo's & Cleaning Products

Here's the videorepair link:
http://kirbywhq.powweb.com/videos/Carpet_Shampoo.mov

I hope this was helpful to you. If it was helpful, please be so kind and leave some feedback, thank you.

Chris J.
GoVacuum.com

Hello,

Please see the following video we've shot on how to replace the belt on a Kirby Generation vacuum cleaner. This should explain to you step by step the procedure to replace the belt. If you need to purchase a belt, we can also help you with this.



Feel free to request a repair clarification if you have any questions I can answer.

If you found this repair helpful, please be sure to rate the repair by clicking the 4 Thumbs Up Icons in the top right hand corner of the repair. Thak you so much.



Chris Jones
GoVacuum

Greetings from GoVacuum,

Here's a very informative video that we've recorded explaining in detail how to correctly install the belt on your Kirby Generation vacuum cleaner. I hope this will help you.

Kirby Belt Change Video;




If this video was helpful, please be sure to rate this Solution by clicking on the 4 Thumbs Up icons in the top right hand corner of the page. If you have any questions, please feel free to email me, I'm more then happy to answer any questions you may have.

Chris Jones
GoVacuum.com

Greetings from GoVacuum,

Ahh yes, the Silver Moon. One of Miele's best made vacuums ever! So good that out of all the different vacuums that I could of chose for my home, the Miele S558 Silver Moon was the one I chose.

When you're Reset button is flashing, this simply means that it's time to replace the HEPA filter on your vacuum cleaner. Miele included this feature on their upper end models to alert the user when their filter needed to be changed.

The Miele Silver Moon uses Genuine Miele S-Class HEPA Filter for S300i/S600i, and Miele S7 Uprights. Miele Part # 04854915 (replaces 04854911) Which can be purchased from GoVacuum for $52.95 with free shipping.

Once you have installed the new HEPA filter, simply press down on the flashing Reset button to restart the 50 hour internal timer inside. Miele recommends to replace this filter after every 50 hours of vacuuming.

If this answer was helpful, please click on the helpful Thumbs Up icons in the top right hand corner of this Solution.

If you have a repair that you would like explained, please check out our Q & A website, askgovacuum.com.

Thank you very much,

Chris Jones
GoVacuum.com

Remove the bottom plate, the belt goes fron the brush rol to the motor shaft or pulley.