This morning i turn on the washer and there was no water coming in to it

The washer could be stuck the seating .

check hot & cold hose , take off hose from washer . Put in bucket open water coming or not .

Hi,

Here is a tip that will help you to find out why water will not come into the dishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101

Good morning. To start off with, get a shallow pan. At the bottom front of your washer, there is a filter trap. If its not visible, you will have to remove the kickplate held on by three screws at bottom. Slide shallow pan underneath and up to frame. Slowly turn counterclockwise until water starts to come out. When pan is midway full, empty. Repeat this procedure until no more water comes out and unscrew filter and pull out and clean. Reinstall snugly and install kickplate if it was removed. Have a good day.

YOU'LL HAVE TO TAKE THE BACK OFF AND SEE IF YOUR FRESH WATER NOZZLE ASSEMBLY IS SOMEHOW DISCONNECTED. GO TO www.repairclinic.com ENTER MODEL NUMBER AND SCROLL DOWN ALL THE WAY AND CLICK THE RED 100 WHEN PAGE CHANGES LOOK FOR PART NUMBER 1202951. THIS MAY BE THE PROBLEM.

Good morning.
The problem lays in the transmission. From outside when you turn the universal (connector) the bowl with the brakes don't turn with the main shaft. When you open the transmission, remove the clip of the big plastic gear. After you lift up the plastic gear you will notice that one or two of the plastic parts are worn down. By replacing you will solve the problem.

Yes Get a space heater and run it by the frozen pipe. Turn off all electricity to avoid shock and it should break free by the morning. Run it at a drip from now on during really cold night just like the sink but set washer on DRAIN this will help. Good LUCK

Your water level switch is defective.  It is generally located below the tub.  It is jammed closed and the machine thinks it has water in it when it does not.  

It looks like your inlet water valve is stuck after it powers on which means you have to replace it. If you can provide me a model and serial number of the dishwasher, I can provide you with the correct part number and a breakdown diagram. You can find the model number on the door frame of the dishwasher.


Post it back
techgirl26