Frigidaire Dishwashers - Recent Questions, Troubleshooting & Support


the problem you have is probably in the heat circuit. its trying to heat the water up and keeps running because the water does not get any hotter. you need to check the heater wires and a couple of sensors as well as the heater itself.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

Frigidaire... | Answered 2 days ago


Check the bottom or bottom panel of the dishwasher for the schematic it is usually in a plastic sleeve.

Frigidaire... | Answered on May 10, 2019


So far so good. I fixed mine by removing the vent and even though it says no repairable parts I disassembled it then removed the rubber gasket and cleaned it with a brush under hot water. I then cleaned the plastic ring it seals against. Next I removed the spring and stretched it to make it about a quarter inch longer and then reinstalled the spring then the rubber gasket and then closed up the unit. So far it is working fine. I suspect the real problem is that there is a tiny sensor that needs to be covered when the vent is closed. If this is not covered the uo error code is generated.

Frigidaire 24... | Answered on May 10, 2019


Does this mean the dishwasher doesn’t work at all or just the display lights? Remember the switch on the wall turns the dishwasher on and off. That could be the only problem !!

Frigidaire... | Answered on May 04, 2019


CL is a generic clear code. Reset the unit at the household circuit breaker for about 10-15 minutes, and then retry. If the same code comes up then you have a communication error with your main control board, and will require a repair.

Frigidaire... | Answered on Mar 25, 2019


Hello Mileshjr,

I don't disagree... Nice looking unit...

What you have to do is assess the LEAK(s)...
and do a cost/benefit analysis...

If indeed the parts are available (they seem to be)

http://www.appliancepartspros.com/motor-pump-parts-for-frigidaire-fdb1050rec0.html

Then all you have to do is find the cause of the
LEAKS and repair them...

Mine turned to be rusted body panels...
(not much you can do there... Unless you
find a complete DONOR... Not unlike restoring cars...

(the labor of love)...

Check out other part houses...

Repair-clinic
Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Part-Select
PartSelect Appliance Parts and Repair Help

... and don't forget to check eBay.

I will confess the new PRO Series "QUIET" models
are VERY quiet... and sooo... pretty I had to REMODEL
the ENTIRE KITCHEN... (no savings there).

Hope this saves $$$$


Carnac the Magnificent

Frigidaire 24... | Answered on Mar 15, 2019


Mine is also making an irritating grinding noise. There may be a solid object stuck in the chopper. I just don't know how to access the chopper.

Frigidaire... | Answered on Mar 14, 2019


Hello friend, thank you for your inquiry!

I understand that your Frigidaire dishwasher is making a grinding noise. Typically that noise could be a faulty motor/pump. I have included a link to your manaul. If that does not help I would recommend having a technician out to your home to properly diagnose and repair your appliance. Best of luck. -Matt
Frigidaire Manual Search Results

Frigidaire... | Answered on Mar 14, 2019


Fliped the circut breaker and got the 3 blinking lights and hit start and it ran fine.

Frigidaire 24... | Answered on Mar 14, 2019


It is possible that you have a weak circuit breaker. Use an extension cord and run it from a different outlet on a different breaker.

Frigidaire... | Answered on Jan 26, 2019


Hello Paul Maksymowicz & welcome to FIXYA, Your ERROR code SEEMS to indicate you have indeed filled your SAFETY tray (designed to prevent FLOODING). FRIGIDAIRE's solution is to UNINSTALL your unit and (TIP) drain your dishwasher to eliminate your "i30" ALARM condition... Without intervention the SEWAGE situation (I suspect) will reoccur... FIX IT...!! To ELIMINATE the DISPOSER flooding condition (building codes usually require an elevated SYPHON BREAK (adequate))... to prevent back-washing of WASTE-WATER into your cleaning unit (serious health & safety issue). FOLLOW proper installation procedures... (read the manual) and avoid poisoning yourself, your family, associates, visitors, friends & loved ones... (my opinion). https://en.wikipedia.org/wiki/Carnac_the_Magnificent

Frigidaire... | Answered on Jan 25, 2019


I had the same problem. I pressed the "Start Cancel" button, kept it down, then pressed "Rinse Only" button. The display then went clear. I pressed "Start Cancel" again, then "83" showed up on the display. I let it run its cycle, then it corrected itself. A little scary, but it worked. This answer board is great!

Frigidaire 24... | Answered on Jan 20, 2019


If you can get it to drain you might try putting a couple of pan of water into machine to clean it out reset by holding down speed button and soil level button together until it gives a sound

Frigidaire... | Answered on Jan 14, 2019


I had water at the bottom of my 4 year old plus dishwasher and of course I thought the worst. Did the pump go out, bad impeller, or what else could it be! I started with the easy stuff first and disconnected the drain lines. The drain line runs from the dishwasher to an air gap mounted to my sink, which keeps the drain line from getting an airlock. From the air gap device another larger line runs to the garbage disposal. I used an 8MM wrench to loosen the clamps enough to pull the drain lines off and drained them into a bucket. There really wasn't any resistance to water flow and no real chunks, I was disappointed.
I then took the actual air gap out of the sink by removing a large plastic nut and pulling the devise out from underneath the sink. When I inspected the air gap I saw a wad of hairy, feathery plastic stuff blocking the flow of water. I took the chunk out, reassembled everything and it works like new again.
It is a very easy fix and now even the area under the sink is clean to boot.

Jerry

Frigidaire 24... | Answered on Jan 02, 2019

Not finding what you are looking for?
Frigidaire Logo

3,815 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Mike

Level 3 Expert

4357 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...