Question about GE WHRE5260E Top Load Washer

2 Answers

Water leaking from bottam while in running cycle

Posted by on

  • 6 more comments 
  • Anonymous Jun 18, 2008

    water leaking under washing machine

  • Anonymous Jul 13, 2008

    tube want hold water while filling no steps have been taken

  • Anonymous Jul 26, 2008

    leaking water while washing

  • Anonymous Jul 31, 2008

    tried to remove a water pump from a kenmore washer and it wont come off what should i do?

  • Anonymous Oct 04, 2008

    my washer

  • Anonymous Nov 28, 2008

    linking from bottom

  • Anonymous Dec 27, 2008

    the washer is leaking in the washing cycle

  • teharpe2772 Feb 05, 2009

    Please help.

    My washer was leaking from underneath and now it has stop running. The floor was flooded and the still full of water. I am not sure where the leak is coming from. If anyone has any advice please let me know.

    you can email back at




2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Water is leaking from the bottam while in cycle

Posted on Oct 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Water leaking from under the machine while running. Also will not stop filling in the rinse cycle.

Posted on Jun 24, 2008

  • carolcray Jun 24, 2008

    Sorry, my previous comment was NOT supposed to pop up as a solution. I NEED a solution! Oops!



1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Output is some blue colour

Do a Cleaning cycle and clean the rollers.

Jan 17, 2014 | Epson L200 All-in-One Inkjet Printer 27...

3 Answers

Scotsman prodigy leaking water

How to work on Scotsman Prodigy Ice Machine

Jan 16, 2014 | Scotsman Kitchen Appliances - Others

1 Answer

Leaking brown liquid

No. - Do not use. - Go to manufacturers site and get a new seal for it.

Dec 01, 2012 | Kitchen Appliances - Others

1 Answer

I own a zanuusi zwd1680w. washer dryer. The problem is when set to drain or if required to drain during a cycle it goes through the motions and hangsup, the water does seem to drain out quite quickly and...

Hi you dont mention any error codes if there problems with draining e20 is displayed any blockage in the pump or drain passage can cause this . however you suggest the draining is ok so this is more likley to be a fault in the water level control. an easy fix would be if you found a blockage in the pressure chamber at the base of 2 x 8mm tubes(from pressure switches) located near the sump hose at the bottam of the drum. undissolved detergent is normally the culprit.jw

Feb 09, 2011 | Zanussi ZWD1680W Front Load Washer / Dryer

1 Answer

Kitchen aid dishwasher-how do I stop water from leaking from the bottam of the door when it is running?

the sealing rubber known as th "membrane" might be worn out. if you have a while using the dishwasher. if its still under warranty do not touch it just notify the retailer where you bought it from.

Dec 26, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...

2 Answers

When the water cycle is running there is a white plug by the water inlet that is leaking. When the dishwasher is not in the water cycle it does not leak. When the dishwasher is stopped in the middle of the...

crack in water inlet valve or a pin hole in the hose going from the valve to side of tub spraying water where you see it. You have a holein someting. You need to trace it back to its sourse. When you say "water is running"im guessing thats when its filling with water not just washing.

Oct 30, 2009 | Hotpoint 24 in. HDA3400G Built-in...

1 Answer

Admiral Leaking

Possibly rinsing with cold water, washing with hot.
Check inlet valves for leaks, especially cold (rinse)
Lift the top panel by inserting a flat blade approx 4" from each side at the front to release clips, then top will hinge backwards.
You can see the valves at the rear behind the drum..
You can run the machine with top lifted to see any more leaks.
Also remove front panel via 2 small screws to gain better view.

Jul 12, 2008 | Admiral AW22 Top Load Washer

1 Answer

Leak problem

Ours did same thing after nearly same amount of time.

Run a couple of sanitary cycles without any cloths.

Only use HE detergent. 

Problem stopped after this

Oct 08, 2007 | LG WM1815CS Front Load Washer

Not finding what you are looking for?
GE WHRE5260E Top Load Washer Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts


Level 3 Expert

85161 Answers


Level 2 Expert

157 Answers


Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides