My Canon Pixma MP480 All-In-One InkJet Printer is printing half the page, words are cut off.

Is this happening with every program you use to print? If it's just a single program, try changing the line spacing. It sounds as if you've got the line spacing too small for the current font and it's cutting off the bottoms in order to print the next line.

Please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts
jay gcslk

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=17160#DownloadDetailAct

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay gvxfza

Have you tried doing a print preview and adjusting the print parameters to fit the paper? Depending on the software you are using, this is many times an easy fix. You might also check the size paper the print parameters are set for in the printer setup. I hope this helps you.

uninstall the printer driver and reinstall it . it will work...

Hello
This can be due to a feeder wrong setting on the printer or on your PC: your printer tries to take paper from the back feeder, whereas your paper is on the front feeder....
try to check these settings in your PC and on your printer, and retry to print, hoping this helps

Have you used page setup in words? is it a problem of A4 or Letter page size? If you have A4 as default in Word and Letter as default in the printer it would react that way (letter is wider while A4 is longer...)

Have a look at the canon usa site:http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=17160#DownloadDetailActThis link should take you to the canon support page, let it load and it will come up with the driver download center.In the area titles "Driver/Software Selection"Use the drop down menu and select "Mac OS x"This will bring up a list of current drivers for the Mac.The most recent one for the your printer is:MP480 series Printer Driver Ver. 10.6.0.0 (Mac OS X CUPS)If there is also a problem with your scanner then you will also need:MP480 series Scanner Driver Ver. 14.8.1 (Mac OS X)Just make sure you look carefully before clicking the driver as there are also spanish versions on the list..I hope these help.Mike

canon