I have a problem of autoo adjusting coming most often kindly help me to get rid of the problem and how it cost to get the problem solved.

possible problem with the cooling fan relay. If the relay shorts internally, it may cause power to be permanently switched on, which will cause the fans to run at all times.
Go to autoo parts store and buy a new one...they can probably help reolace it.

a choke system has a spring inside it which keeps on or off the system like a switch .u can bind that with a wire or something to avoid autochoke during jumps or ride.try out it will work.

If lowering the red screen control does not solve the problem----the red picture tube is the problem--they are only available for this model on a rebuild basis--tube has to be removed and shipped out for rebuild---the last one I did was in a shop I worked for and the set was under extended warranty--cost just for the tube was near 300 not counting labor.

If you do not have an extended warranty this set probably will not be worth repairing for this. There is also something else to consider--all three tubes in this set are prone to this kind of trouble.

I replaced dozens of them when the sets were fairly new and still under warranty.

I am sorry the instructions for trying to adjust did not give you a permanent fix but based on what you have said--this set is not going to be fixed for a reasonable cost.

If the instructions (which I think were mine) helped you at all rate this solution as I do this here for free.

SD TECH

I would suggest you to kindly switch your browser with google chrome. That will deffinetly solve your problems and kindly restrict usage of Iexplorer as that is the most virus porne browser.
For any further assistance kindly comment back

try to push the menu button for 5sec, maybe it will be solve the problem..

If it does not working right - get rid of it while it is still under warranty.

My view sonic monitor E70fB Model. Without I Press the menu, it always appearing on the Screen. Some times Contrast up/down and osd lock and it suddenly scrollsfor other options.

If I press the exit button, it sometimes exits or agin it occurs.

So please kindly solve this problem

Hello riff5000719,

The problem with your TV might be the convergence correction amplifier modules (2 STK392-110). These modules often malfunction and produce the symptoms you are describing. The cost of the parts is about from $12.00 - $32.00 depending where you buy the parts from. The major cost will be the labor, and if needed the cost of installing the biasing circuitry that the modules use. This usually costs around $200.00 - $400.00 depending on the shop.

Getting rid of it might not be warranted if you can spend the 200-400 to get it repaired.


I hope this helps,

Thank you,

Shuttle83

Your loopers need adjusting, impossible to explain how to do this, you need to be shown. Can I suggest you contact a sewing machine tech, sure it will cost but if he is a decent guy he will show you how to adjust the machine.

I would suggest calling a repair shop explaining in detail what your problem with the set is and see if they can give you an accurate estimate on what the cost would be to repair your set.