Canon I lost my disk need sofware

I lost the disk to my canon mg3250 and need to re-install on my PC as I wiped everything. I tried downloading from the site but it my PC says it doesn't recognise the software even though I have put the correct operating system choice in?

1st You download Webcam Driver.
I need for the istallation sofware I have lost the CD
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Hi,
Install Drivers and sofware first. Then reboot your pc.then plug your usb in to your pc and connect your power cord to your printer. turn your pc on and your printer, all should work well.
You will need a usb cable so your pc can talk with your Printer.
Hope this helps.

you need to provide the OS you are using for me to help you more specifically. I have provided the link below where you can select your operating system and download the sofware yoyu need to replace the lost cd. Good luck

http://software.canon-europe.com/products/0010383.asp

A lot of people assume that they must use the cable and sofware that came with the camera in order to download their photos. The problem is that the cable/camera way can be very problematic.

In your case, it would be difficult finding another solution disk for your camera. But that's OK, and for those of you that navigated here looking for a solution to that lost cable, lost software disc, or computer that just fails to recognize your camera, please see this link. It will make your life much easier/happier.

You can get your sofware here:

http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

download from canon.com

Here you can download drivers and software for mp390. Just select drivers and download tab, and select your OS (eg.Windows xp, Windows Vista etc.).

regards

Here is the link for your driver and software. Just pick your operating system and away you go. Please rate if this helps. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11642

i lose my software cd help me my tv-tuner is intex( SAA7130 TV Tuner/FM Radio/Video PCI Capture Card )