At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure you are using the right needle for the application. Also check that your needle isn't damaged, bent or put in backwards. Sometimes a needle will have a burr on the eye, just sharp enough to break the thread. So always buy quality needles. Check your tension too.
Did you brush it out? Now, unplug and wait 15 seconds the plug in again. Totally rethread your machine and make sure the thread is not tangled. That should reset it. If not, call Brother at 1-877-276-8437
Error E-4: The reverse/reinforcement stich button, needle position button or thread cutter button was pressed while the bobbin winder shaft is moved to the right
before you do that, make sure that the machine is threaded correctly. often when the needle is threaded from the wrong side, the thread is wrapped around the top wheels incorrectly, or the bobbin is not threaded right, it will cause the needle to get jammed in the bobbin. however, if this does not work, check their hotline and ask the maker what you should do. you can also go to a local sewing machine store and have them take a look at it.
My broth cs-600i will not turn very easy
my brother cs-600i will not turn very easy
×