How to set clock/timer - Intermatic & Indoor/Outdoor Rain Tight Timer

Range Setting the Clock and Timer Non-Electronic Clocks: To set the clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)
Digital Clocks: To set the clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.
Electronic Clocks: To set the clock touch the Clock pad. Touch the number pads. Touch the number pads. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

OXO doesn't provide a link to download the instruction booklet for this model, but I own it too, and this is what I've learned:


To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I'm assuming that you're referring to OXO's Digital Timer Model #1061978. OXO doesn't provide a copy of the instruction booklet for download, but I also own this timer, and this is what I've learned:



To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I also own this model, and the manual isn't availble on OXO's site. But this is what I've learned over the years:



To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

This is the only timer model OXO doesn't provide for download on their site. But I also own this timer, and this is what I've learned:


To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I'm assuming that you're referring to OXO's model #1061978 and it's the only timer manual not available on their website. But I also own one, and this is what I've learned:



To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I own this model also and OXO doesn't offer the manual online. So here's what I've learned to do:




To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

Hello
To set clock:
1. Press "Timer/clock button". The hour digit begins to flash.
2. Press (<< P.DOWN or >> P.UP) on the multicontrol to set Hours.
3. Press SET button. The minute digits begins to flash.
4. Press (<, P.DOWN or >> P.UP) on the multicontrol to set Minutes.
5. Press "Set" button."CLOCK OK" appears on the display. The clock stops flashing, and the clock timer starts from "0" seconds. If the clock is not set "AM 12:00" will flash instead of the clock indication. When the time has been set, TIMER/CLOCK can be used to operate the daily timer recording timer.
If you haven't the user manaul to your set with you now, send your email address to me by Fixya comment bos. I've the downloaded user manual to your set, and I'll send a copy of it to you by return mail. OK.

my Taylor 5851-21 has Hour Min Then under thatt Timer/Reset abd Start/Stop. How do I set the time. I know how to work the timer and reset the timer, but I need to set the clock. But it does not have a clock button label as you describe above.