Oxo Hardware & Accessories - Recent Questions, Troubleshooting & Support

This is the only timer model OXO doesn't provide for download on their site. But I also own this timer, and this is what I've learned: To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

OXO doesn't provide a link to download the instruction booklet for this model, but I own it too, and this is what I've learned: To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

The instruction booklet for OXO's Triple Timer Model ## 1071501 can be downloaded here: http://www.oxo.com/download/556_gg_1071501_booklet.pdf

I'm assuming you're referring to OXO's Magnetic Digital Timer model #1127980. The instructions require a CR2032 (coin-type) battery which is accessed by gently prying the battery cover off with a coin. You can download the instruction booklet here: http://www.oxo.com/download/1183_gg_1127980_booklet.pdf

The instruction booklet for your timer is available for download here: http://www.oxo.com/download/1183_gg_1127980_booklet.pdf

I also own this model, and the manual isn't availble on OXO's site. But this is what I've learned over the years: To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I'm assuming that you're referring to OXO's model #1061978 and it's the only timer manual not available on their website. But I also own one, and this is what I've learned: To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

I own this model also and OXO doesn't offer the manual online. So here's what I've learned to do: To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

The instruction booklet is available for download here: http://www.oxo.com/download/556_gg_1071501_booklet.pdf

To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

To set clock:

1. Press and hold clock/timer button for 3 seconds (clock icon will appear on left side of screen).
2. Input time using keypad then quickly press clock/timer button to save.

To set timer:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Enter desired time using keypad (to a maximum of 99hrs:99mins:99secs).
4. Press stop/start to begin countdown.
5. Pause countdown by pressing stop/start; resume by pressing button again.
6. When countdown is complete, timer will beep continuously for 30 seconds and display will flash. Timer will then beep every 10 seconds for 10 minutes until the stop/start button is pressed.
7. Press clock/timer button to return to clock function.

To time activities:

1. Press and release clock/timer button.
2. If necessary, press clear/memory so timer reads all zeroes.
3. Press stop/start and plus (+) sign will appear on right side of screen as timer begins counting up.
4. Pause count-up by pressing stop/start; resume by pressing button again.
5. When you're finished timing, press stop/start to end timing function.
6. Press clock/timer to return to clock function.

• When the switch is ON, the light operates in dusk-to-dawn mode. In this mode, the light automatically turns on at sunset and turns off at sunrise. When the switch is off, the light stays off.