Emerson TV/DVD Model #: LD195EMX Problem: Need remote code for Echostar 4.0 IR/UHF Pro Dish Network remote, 3 digit code to control volume and on/off functions on TV.

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remotes. You should be able to locate the model of your remote on the back of the DISH remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remotes and the instructions for addressing your Emerson TV to the remote. I hope you find this information useful and if you have any further questions please let me know.
Remote models Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 632, 505, 516, 669, 627.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 667, 666, 233, 660, 733, 846.
4.0 and 4.4 IR/UHF remotes - codes 733, 632, 656, 569, 846, 516, 627.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 733, 632, 569, 738, 764, 506, 516.
20.0 IR and 21.0 IR/UHF remotes - codes 672, 632, 654, 516, 777, 846, 738.

Instructions for addressing the remote to the TV
1. Press and hold down the TV mode button until all the mode buttons light up red.
2. Enter the 3 digit code for you TV.
3. Press the pound(#) button once.
4. Test the TV functions on your DISH remote.
5. Press the SAT button once.

Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. In order to program your remote to your TV you will need to first locate the model number of the remote. The model number of the remote will be located on the back of the remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best remote codes for our more popular models of remotes. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at [email protected].

Models of remotes Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 632, 516, 669, 627.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 667, 666, 233, 733, 684, 846.
4.0 and 4.4 IR/UHF remotes - codes 733, 632, 569, 516, 537, 627.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 632, 569, 764, 733, 516.
20.0 IR and 21.0 IR/UHF remotes - codes 672, 632, 654, 516, 777, 846, 672.

Instructions for addressing the remote to the TV

1. Turn the Television On.
2. Press and hold the TV Mode button until all other mode buttons light up red.
   
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to readdress your DISH remote to your new Vizio TV. We have a few different codes for each of our different models of remotes. You will be able to locate the model number of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for Vizio TVs as well as the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at [email protected].

Codes for Vizio TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 505, 671, 627 and 766.
5.0, 5.2, 5.3, 5.4 IR remotes - 627, 505, 506, 457, 111 and 520
4.0 and 4.4 IR/UHF remotes - 505, 627, 555 and 766
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 627, 505, 678, 825, 520 and 766
20.0 IR and 21.0 IR/UHF remotes - 505, 598, 627 and 773

Instructions for addressing your remote to your TV.

1. Turn the Television On.
2. Press and hold the TV mode button until all other mode buttons light up red.
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Hello, my name is Daniel Busa with DISH Network customer service below, are the codes for your emerson tv and a limk with instructions if the codes don't work try the powerscan method in the link I gave you.
632,516,627,654,720,532,500,526,534,536,541,573,,590,636,642,648,652
http://www.dishnetwork.com/SupportSection/setup-remote

nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

i would suggest trying power scan again...

1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

if this doesnt work try addressing your old remote to the receiver by pressing record from system info screen