C-0105 clear - Konica Minolta BizHub C650 Copier

check the paper trays 3 and 4. jam paper behind the trays????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

0105 - MAP/BP Circuit Malfunction
0400 - EGR Flow Malfunction
0500 - Vehicle Speed Sensor Malfunction
1405 - DPFE Sensor Upstream Hose Off Or Plugged

Hello
Setup codes for URC 9040 with Hitachi Tv are:

0225 1225 0009 0578

0036 0044 0108 0473

0163 0343 0217 0109

0194 0178 0516 0072

0481 0499 0037 0508

0556 0548 0363 0719

0634 0744 1037 1137

1170 0105 0492 1481

0361 0512 0480 1045
1576 1149 0877

0108 0225

The code refers to the heating mechanism of the upper fuser roller. try going into service mode by pressing, "additional functions", then "2" and "8" at the same time, and then "additional functions" again. (it can be a little tricky sometimes with this model) Select "copier", then "function", then "clear", and then select "err" or error from the list. press "ok" in the lower left of the touchscreen, and then cycle the power on the machine. If the code does not clear you could have bad thermistors.

that error is from fixing unit try to reset that error to reset that error press * 2&8 * then select copier then select function then press clear then select erro then press ok then turn off/on the power switch

fixing overheating

its problem power supply please repear it near by a good technician who repear it

hi you must reset the counter in service mode *2,8* counter and put new value on mentioned parts

Hi...
The Relay RZ - 0105.
Is the Main relay...
Thsi relay is used to : Powered the FUEL PUMP, INJECTORS, IGNITION COIL and the more important The ECM " Engine control module"

Mitsuba is the Brand...

Ok. I hope this help on your question.

Thank you for use fixya..