Sansa c240 frozen

Do you mean to say that your LG "PC" is frozen at the logo/Start-up screen? What OS are you running?

Maybe your answer can be found here:
http://www.fixya.com/answer/answerpageslideview.aspx?thid=25255410

You need to use the supplied Sansa Media Converter program to convert your photos and videos to a format the Sansa can handle. If you've misplaced the SMC, you can download it from
http://www.megaupload.com/?d=3IPZO6Q0

If the Fuze is frozen, reset it by sliding the power switch all the way up and holding it there for fifteen seconds.

how to re install my sandisk sansa c240

Does it show up under "My Computer" when you plug it into your PC? If so, download and run the Sansa Firmware Updater to update its firmware.

http://kb.sandisk.com/app/answers/detail/a_id/156/kw/firmware/r_id/101834

SanDisk logo appears when stated then screen goes to grey and black. All appears to be frozen.

software of your mp3 is damaged...reinstall it

try this :)

turn the hold switch on, then off.
then hold down the "Play Button" and the "Middle Button" at the same time, until you see the apple logo on the screen. :)

This is from the Sansa Website at http://www.sansa.com/support/sansa_e200/faqs

My e200 freezes on the “Refreshing Database” screen
STEP 1 – Reset the device

1. Press the Power button and hold it for approximately 10 seconds.
2. Release the Power button once the device is powered down.
3. Turn the device back on.

STEP 2 – Download and Install the Sansa Firmware Updater

I this helps please dont forget to rate my answer.

modelo e200r videos

I have a proplem with my sansa e250 after upgrading it. Now I can't start my sansa. The whole sansa is frozen. Just appear SanDisk logo on the screen, blue wheel lite and that's all.
I tryed several time to reset it by pressing the power on (menu) buton for more than 15 sec. It power of after that, but when I try to start it again problem persist - sansa e250 is frozen after logo of sandisk apear on the screen.
Please help me