Suspect door spring/assembly broken. How do I repair same?

see this causes and fix it. God bless you
Open Lever If the microwave door won't open the open lever might be broken. This part can be replaced separately.

Door Spring If the microwave door won't open the door spring may have broken. The door spring is located inside the door and keeps downward pressure on the door hook.

Door Latch If the microwave door won't open the door latch might be broken. The door latch is inside the microwave. The door hook, which is part of the door, engages with the latch to keep the door closed during operation. If the door latch or actuator breaks the door may not open.

Door Hook If the microwave door won't open the door hook might not be releasing properly. The door hook is installed inside the door and normally releases when the door is opened. The hook is made of plastic and will break over time. When this happens it will need to be replaced, it can't be repaired.

Button Spring If the microwave door won't open the button spring might be broken internally. The button spring can be replaced.
Button If the microwave door won't open the button might be broken internally. The button can be replaced.

Handle Actuator If the microwave door won't open the handle actuator might be broken. This is a plastic part which can become brittle over time. This part is connected between the door button and the door latch assembly.

We have the service manual and have uploaded it to our site here to help you.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

You can order parts here if needed.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer

Unfortunately, the exploded views do not show the innards of the door.

So as new latch head is not available separately, so if you cannot fix yours, a whole new door will be needed.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

There's probably a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

You can use use epoxy and some kind of hardware to fashion a new spring mount.

If you have to do any gluing, make sure the parts are squeaky clean and dry before you glue them, or it will not hold up.

Good luck!



We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

If you gently push up on the door latches (hook-like devices on the door) there should be spring tension. If they just flop right up, the spring is off.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have critical safety & disassembly info at our site, linked here.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

The best place to order parts is Tritronics. You can also call them at 866-779-5835.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

The door latch head (hook) is pretty easy to replace or repair if that's the issue.

If you gently push up on the door latches (hook-like devices on the door) there should be spring tension. If they just flop right up, the spring is off.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We have critical safety & disassembly info at our site, linked here.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you. You will need the free Adobe Reader to view or print it.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

While I don't have that model's diagram, normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

You can order Panasonic parts here.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

check the door latches inside the oven, open the housing and spray some lubricants on the latches.