Canon MP210 no power

Unplug power and USB cable.
Open door and hold power button.
Connect power.
Close door, then release power button.


full article: http://resetcanon.com/reset-canon-mp210-pixma-inkjet-all-in-one-printer/

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on
3. hold the Power button, release Resume Button.
4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.
5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy New Year!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

http://drivers.softpedia.com/get/PRINTER/CANON/Canon-PIXMA-MP210-MP-Navigator-EX-106.shtml

Power down the printer completely. Unplug from wall.
Re-insert all cartridges. Then power up It takes a while for the test page to print. After that you should be good to go

Hello there:
here is the normal step for this procedure.

• Turn off the canon printer
• Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
• Hold the Power Button, release the Resume Button.
• Not releasing the Power Button, double click “Resume” and release Both Buttons.
• Click “Resume” for Four times
• Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
• I hope that you find this very helpful for you
  
• Please dont forget to rate this for me it helps me so i can continue helping others
  
• Best regards michael
  

Put your hand under the bit with canon name on it an lift gently.

Reset Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Clean the print head nozzles (Mac OS X) MP210 Clean the print head nozzles (Windows) MP210 Clean the print head nozzles - MP210 Perform Print Head Alignment (Mac OS X) MP210 Perform Print Head Alignment (Windows) MP210 Replace ink cartridge(s) MP210 Reseat ink cartridge MP210

Visit

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=15402

i've refilled mp210 both cartridges.do you know how to reset the printer?cause it's show error 6,please help

Check the following links:

Canon Pixma MP210 Multifunctional Inkjet Printer
How To: Change Cartridge / Canon Mp210
change cartridge mp210.