I cannot access my router.

Hi ..

The PS3 has 3 different NAT types. They are shown below.
Type 1: The PS3 is connected to the Internet without a firewall or router. No NAT issues.Type 2: The PS3 is connected to the Internet through a router which is configured correctly. No NAT issues.Type 3: The PS3 is connected to the Internet through a router that needs configuring.Ideally, you want to have a Type 2 NAT. However, a Type 1 NAT does not affect your game play.


First of all you will have to Disable the firewall in the Router / Modem

If you are using a Router ..

Then

Make sure that UPnP(Universal Plug n Play) is enabled
Enable the IP Address of the PS3 in DMZ

Or Forward the ports

Below are the TCP and UDP ports that need to be forwarded:

TCP: 80, 443, 5223
UDP: 5223, 3478, 3479, 3658

For more details on port forwarding , log on to http://portforward.com/english/routers/port_forwarding/routerindex.htm

Hope it helps

Regards
Tom

Well this becuse of NAT on the router

you can solve the problem by putting your PS3's IP address on DMZ in the router

access your router page (type 192.168.1.1 in the address bar of internet explorer)

username would be admin and password would also be admin

go to the DMZ and enter the IP address of the PS3 there after enabling it....restart your PS3....bingo your problem solved

Note:- you can check your PS3 IP address in the network settings and connections option on PS3

Hope it helps

Thanks

NAT STRICT

Step 1 : Connect - Router - Computer ( Wired )

Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of internet explorer

Step 3 : Click Login

Step 4 : On the Left Click Access

Step 5 : Choose DMZ

Step 6 : Click Enable ... And Assign the IP Address of the Xbox /PS3/Wii in it

Step 7 : Click Apply

Step 8 : Unplug the Power cord from the router and turn Off XBOX /PS3/Wii

Step 9 : Plug the power cord back to the router and wait till the lights are Solid

Step 10 : turn On the Xbox/PS3/Wii

Step 11 : Test the Connection

Step 12 : If Still the Same ..

Step 13 : On the Left under Access Click Firewall Rules

Step 14 : Disable it and Apply

Step 15 : Do Steps 8 through 9

Step 16 : Test the Connection


let me know if this works

Regards
TOM

Try to power cycle the router for about 1 min. If this will not work, try disabling all your anti virus and firewalls. If doesn't work, try 192.168.0.1 / 192.168.1.1.

If you have no access to the router, you can't change its NAT parameters. Sorry.

• you need to access the router access page of the router, look at the bottom for router access page or call router support
• then go to WAN setup to enable/disable NAT
  

It seems like you have 2 Different Issues ...

1 ) Low Speed on Vuze Downloads

2 ) NAT 2 On PS3

=============================================
TO REDUCE THE NAT ON PS3
=============================================

Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the PS3

Step 7: Get the IP Address of the PS3

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the PS3 in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

Goto : my blog for more information about belkin routers (Page is still under construction )

==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

you need to make sure that when you change it that you apply in your modem setup page that bridge mode is activated so that it turns it into a dumb unit allowing just to pass through the internet stream thus allowing constant nat 2 connection

thanks for help , the error was from user that have viruse on his pc , thanks again

In order to achieve NAT 2, you are going to have to set your PS3 to a static IP address and forward ports on your router.

detailed instructions on how to do this and configure your ps3 can be found here:
http://www.pregamelobby.com/forum/sony-reviews-tips/5618-how-get-type-2-open-nat-your-ps3.html

In order to get into your router settings, go to 192.168.0.1 OR www.routerlogin.net (the router sets up its own DNS) and putting in your username and password. If you have not set up a password, the default username and password for this router is "admin"/"password". Follow the instructions in the page I posted once you are logged into the router's webmin.

Hope this helps!