3 digit code for sony trinitron tv

Sony FD Trinitron WEGA... Repair Questions - Fixya

www.fixya.com/.../p228979-sony_fd_trinitron_wega_kv_36fv310_36_t...

Hello, i have a sony FD Trinitron WEGA #KV-36FV310 ... Need to know whichoptocoupler ic is used in str 6267 based power supply in sony trintron crt tv.

Sony KV-TG21M61 21" TV Repair Questions,... - Fixya

www.fixya.com > Forum > Standard (CRT) Televisions > Sony

Need to know which optocoupler ic is used in str 6267 based power supply in ... My sony crt Tv totally dead when touch any components and the IC strs6307 ...

Tv code hi i'm looking for a 3 diget programming code for my ...

Search Results

Sony eSupport - Remote Control Codes & Programming ...

https://esupport.sony.com/.../select-system.pl?...RCOD...

Sony CorporationFind the codes you need to program your remote control. ... Television - Accessories; Television - FD Trinitron® & WEGA™; Television - Internet TV & Players ...

[PDF]Trinitron Color TV - Manuals, Specs & Warranty - Sony

https://docs.sony.com/release/KV20FV12.PDF Sony CorporationRefer to section 54-300 of Canadian Electrical Code for Antenna Grounding. Lightning .... Congratulations on your purchase of the Sony Trinitron Color TV.

[PDF]Trinitron Color TV - Manuals, Specs & Warranty - Sony

These are the codes to check. 10000, 10011, 10273, 10353, 10834, 11317, 11400, 11685, 11786, 11791, 11904, 11925

Hi trinidat
To answer your question;
In many cases the 4 digits code for sony tv`s is "0000"
But if you let me have your remote`s brand name and model # i may be able to help you further.
The model# may be inside the battery compartment.
Be waiting for your reply

analog

standby light flashes tv wont turn on

1. Turn TV on.
2. Press and hold TV button and Power button until light stays on.
3. Release both buttons.
4. Aim remote at TV and press the power button every 5 seconds until TV turns off.
5. Press stop button at bottom of remote.
   

Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

I have the original operating instructions. What is it that you are looking for exactly? There is a list of codes for various vcr's, dvd's etc. and manufacturers but this is to program the remote which you don't have.

i dont think its HV
3 blinks is B+ voltage.

just replace the main board.
sum times andrews electronics has them for around $80
regards,
daniel.

I have a Zenith universal remote that i want to program to a sony 27 inch Trinitron, what are the codes?