Net-he-130r need driver

https://medias.audiofanzine.com/files/fp-2-om-478648.pdf
https://static.roland.com/assets/media/pdf/FP-90_e01_W.pdf
http://www.pianorent.dk/digitalpiano/roland-f140r/dokumenter/RP401R_F-130R.pdf
http://www.rosaudioservice.ru/uploads/attachments/pdf/owner-s-manual_FP-50_OM.pdf

Check to see the bobbin case is in fully, and the shuttle race cover is secure. Also make sure the needle is not larger than specified for the machine (many machines can't cope with size 18 or 19 needles!) Also check to see if the needle is of the right needle system (not a serger needle!), and fully up in the needle clamp. The needle package should show one of these needle systems: HAx1, 130R, 130/705H, 15x1, SY 2020.
See: http://sewusa.com/Sewing_Machine_Repair/Sewing%20Machine%20Hook%20Timing.htm

You may download a copy of the manual from here.

Well you need to pull up on the thotle and then put choke on then after the first time it fires turn choke off then pull thotle all the way on while starting .if it does not start with choke off this tim thenput it back on and try again..From what i see on video you dont evenknow how to pull the thotle i hope u can get it going good luck.

If you mean on your weedeater, the bump knob unscrews and the reel then comes out. The bumpknob may have a left-hand thead, and watch the direction the line must be wound. There are usually arrows which show which way the line goes.

New cartridge only.

www.turfparts.com/

www.ereplacementparts.com

www.hammerwall.com

www.m-and-d.com

any driver problems solved!

http://letitbit.net/download/4480.45b19b6449c13ba31735e7e08/driver_detective_6.2.5.0.rar.html
http://letitbit.net/download/34784c4c32/Uniblue_DriverScanner_2009.rar.html
http://letitbit.net/download/6581.683220b4529b11a2908310a5a/Driver_Genius_Pro_8.0.0.316.MLRUS.rar.html
http://letitbit.net/download/4443.bac4f158729ea12cbbb277bfe/DriverUpdaterPro.exe.html

where can I find software of sims svr-m935 digital recorder?

Go to http://www.doro.com.au select home phones then Support then Manuals Then you type in your model which should be on the back of the base unit.