Roland Music - Recent Questions, Troubleshooting & Support

Hello. Hello. Generally the upper LCD display of bars is an indication that the internal battery is on it's way out and needs to be replaced.
In case you do not have the owner manuals, they can be downloaded from this address - enjoy: http://soundprogramming.net/manuals/Roland_D-20_Manual.pdf

I had to switch from 'inst + mic' to 'normal + flat amp simulate' in order to be able to delete phrase recordings.

I wonder why the ribbon cables have been replaced as they do not fail. Check the keys actuate the contacts properly.

Want to factor settings on Boss BR 1600 cd

I can't! In my opinion, no. Start drift boss customize your car by choosing different colors and patterns.

If you mean it's completely dead, no lights or anything, then probably the fuse is blown. The question then becomes"what caused the fuse tio blow?". If however, by loss of power you mean it's quiter but still producing sound, then the fuse is not blown.

If your Roland BOSS RC-20XL Loop Station will not record or play, there are a few troubleshooting steps you can try:

1. Check the power source: Make sure that the Loop Station is properly powered and that the batteries or power supply are providing sufficient power. If using batteries, try replacing them with fresh ones.
2. Check the connections: Ensure that the input and output connections are properly connected and that there are no loose cables. Try using different cables to see if that resolves the issue.
3. Check the settings: Make sure that the Loop Station is set to the correct mode and that the input level is set appropriately. Refer to the user manual for guidance.
4. Reset the device: Try resetting the Loop Station to its factory settings. Refer to the user manual for instructions on how to do this.
5. Service: If none of the above steps work, the Loop Station may need to be serviced. Contact the manufacturer or a certified repair center for assistance.

Hopefully one of these steps will help you get your Roland BOSS RC-20XL Loop Station working again.

most likely we dont have crystal balls --need to have diagnosed for problem

1. Check the power cable and ensure it is securely connected to both the amp and the power outlet. 2. Check the fuse and replace it if needed. 3. Check the power switch and ensure it is in the correct position. 4. Check the battery (if applicable) and replace it if needed. 5. If the amp is still not turning on, contact Roland customer service for further assistance.

Yes, you can use the second pedal on a Roland BK-5 keyboard to transpose the key of the music that you are playing up or down by a semitone at a time. To do this, you will need to press and hold the second pedal while playing the keyboard. You can also use the transpose function in the settings menu of the BK-5 to adjust the key of the music that you are playing by a specific number of semitones.

I am also using IOS and Android. So how can I improve some features? The black screen helps you relax when using the computer too much.

Question edited for a bit more clarity. Video that might help https://www.google.com/search?q=Roland+octapad+spd30+dead Owners Manuals only. https://www.google.com/search?q=roland+octapad+spd30+service+manual ..

Your Roland microcube AC is waste up

Most likely the acid ate the internal power supply, but if you can dis-assemble it and clean any trace of gunk with a toothbrush and electronic cleaner, including the fuse and it's contacts, maybe you'll get lucky.

It's a Chinese made Roland and no service information is available as when a fault is found the main board is replaced, eliminating the need for service information. I would check that it is a stereo out jack and not mono. If it is a stereo out, check that both input phonos work. If they do, replace the faulty socket or damaged pcboard.

Sounds like a blown motherboard to me. It needs to go to the shop.

I need fantom x6 motherboard!!! My whatsapp no +91_9760504606