How to change the ink in a Canon PIXMA MX310?

1. Make sure that the machine is turned on, lift the Scanning Unit (Printer Cover) with both hands, then pull the Scanning Unit Support (A) down into place.
   
   
   
   
   
   
   
2. Take out a new cartridge from its casing and gently remove the orange protective tape in the direction of the arrow.
   
   
   
   
   Note: - Do not attempt to reattach the protective tape once you have removed it.
   - Do not touch the gold electrical contacts or the print head nozzles How to change the ink in a Canon PIXMA MX310? - 05sj00081_03.jpghe protective tape.
   
   
   
   
3. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*
   
   *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.
   
   
4. Push up on the front of the cartridge until it locks into place. (A clicHow to change the ink in a Canon PIXMA MX310? - klikinthekart.gifheard when the cartridge is locked in place.)
   
   
   
   
5. Confirm that the ink cartridges are installed properly.
   
   
   
   
   <1> The ink cartridge is not installed properly.
   
   <2> The ink cartridge is installed properly.
   
   
6. Fold the scanning unit support and close the scanning unit (printer cover).
   
   
7. Wait until the preparatory operation is complete; it takes about one to two minutes.
   

1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.
   
   
2. Press down on the semi-circular tab to relHow to change the ink in a Canon PIXMA MX310? - removethecarts.gif and then remove it.
   
   
   Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.
   
   
   
   
   
3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.
   
   
4. Fold the scanning unit support and close the scanning unit (printer cover).

MY FRIEN SET UP MY PRINTER, NOW THE INK IS FINISHED AND I LOST THE MANUAL AND I DONOT KNOW WHERE THE INK IS GOING TO, ALSO I HAVEN,T BUY THE INK YET. FIRST I WANT TO KNOW WHERE SUPOSE GOING THE INK. PLEASE CAN YOU HELPING ME. THANK YOU.